How to use the memory diagnosis function of Win8 system?

Using the Windows Memory Diagnostic Tool:

Following the above tips, we select the default first item of the recommended item, save the document that needs to be saved now and work after we click: immediately restart and check the problem (Recommended)

All operations are automatic, after which the computer will restart and log in to the following interface:

This is the memory diagnostic interface in progress.

With F1 we ​​can manually define some parameters that need to be adjusted and modified as well as the type of test:

This is the fast mode, the minimum memory test for Basic, so the detection speed is the fastest!

Then we can use the up and down keys to select the standard interface. This is also the default execution mode:

The last detection mode is the ultimate! It is also the most detection item, the most demanding level, if you want You can select this option for a thorough broiler type test on your memory:

By default, the diagnostic tool will perform 2 times (two rounds) of the content of your selected project, but you are completely You can manually modify the number of times this test is repeated, up to a maximum of 99 times! Use the TAB key to locate the number of modifications and type the number of rounds required.

Press F10 to apply, the diagnostic tool will start to run fully automatically until the number of cycles is set to your value, the system will restart, and bring the following prompt:

In general, According to your memory size and selection level time will be long and short, slowly wait for it to pass, the system will automatically restart, whether it is failed or through!

After restarting, as shown in my computer There is no error in memory!