Win8 system how to set up wireless sharing tutorial

Teach you how to set up Windows 8 wireless sharing. Let two or more notebooks pass the cable of one of the notebooks (of course, wireless), wireless Internet access, the realization principle is to set up a wireless coverage hotspot by setting up a virtual AP with the built-in wireless network card of the notebook. Method one, you don't need any software, you only need to set up your computer. It is recommended for people who like tossing.

There are two conditions for building a hotspot first:

(1) The system is a computer with WIN8 Internet access (use XP for quick change, 嘿嘿)

(2) The wireless network card supports the bearer network (preferably updated to the latest wireless network card driver)

The setup steps are as follows:

The virtual base station function of win8 will be a computer with Internet access (of course, wireless The network card is virtualized into a wireless base station that shares the network connection.

1. How do you see that your network card does not support the bearer network? Run CMD in administrator mode. Enter the command line netsh wlan show drive. If the support is displayed as Yes.

2. Set up the bearer network input netsh wlan set hostednetwork mode =allow ssid=the name you want to use (such as hjq) key=the password you want to use (such as huangjianqiang seems to password at least 8 or 13) ) Prompt to bear the network settings successfully

3. At this time, you can see more than one virtual network card in the change adapter settings of the network and sharing center. "Wireless network connection 2" Microsoft Virtual WiFi Miniport Adapter.

At this time, select Share in the locally connected NIC properties, select Wi-Fi connection 2 from the drop-down menu, and then select Share. Both checkmarks are clicked.

4.Open the wireless network card and enter the command line

netsh wlan start hostednetwork Start the bearer network

5.Start scanning wifi with other computers or mobile phones, log in with the password you set. It can be

6. However, each time the site is booted, it will not start automatically. It must be started manually. As mentioned above, run netsh wlan start hostednetwork again in the command prompt as an administrator. However, the solution I took was to create a batch file and use Notepad to enter the following: netsh wlan start hostednetwork, save as "open virtual base station.bat";

However, there is still a problem, this command is only Administrator privileges can be run normally, so after you open the wireless network card, right click “run as administrator".