Windows2003 practical use skills seven

First, skip the disk maintenance waiting time Once the computer is accidentally caused, such as a sudden power failure or a crash, then the next time the computer restarts, the system will take about 10 seconds to run the disk scanner, check Whether the disk has an error. If you are a person who cherishes time and money, you will certainly not wait in vain. Then come with me, skip this check waiting time: 1. In the start menu, execute the “program”/“accessory”/“command prompt” command to switch the interface to DOS command line state; 2, directly enter the "CHKNTFS /T: 0” command, click the Enter key, the system will automatically change the waiting time of the check disk to 0; 3, the next time you encounter an abnormal situation After restarting the computer, when the system calls ScanDisk again, there is no need to wait. Second, cancel the security check on the website After installing the Windows Server 2003 operating system, open the browser to query the online information, and find that IE is always "not bothered" to remind us whether we need to add the currently visited website to ourselves. Trusted sites; if you don't trust, you can't open the specified page; if you trust, you must click the “Add” button to add the page to the list of trusted sites. However, every time you visit a web page, you have to go through such steps, which is obviously too cumbersome. In fact, we can use the following methods to let IE uncheck the security of the website: 1. Execute the “Start” "Start">Settings>;&“Control Panel” command in the open control panel window. Double-click the "Add and Remove Programs" icon with the mouse to switch the interface to the "Add and Remove Windows Components" page; 2. Select the "Internet Explorer Enhanced Security Configuration" option with the mouse and continue to click The option can be removed from the system by one-step button; 3. Click the “Complete” button to exit the component deletion prompt window. In the future, when you go online, IE will not automatically check the security of the website, which will save a lot of trouble. Third, automatically enter the Windows Server 2003 system Every time you run Windows Server 2003 system, you need to hold down the Ctrl+Alt+Delete composite key, and then enter the login password, in order to enter the system; if you need to log in frequently, everyone It may not be able to stand the steps like this. At this point, you may wish to follow the steps below to let the system automatically complete the login operation: 1. In the Run dialog box, enter the registry edit command regedit to open the registry edit window; 2. In the window, expand HKEY_LOCAL_MACHINESSOFTWAREMicrosoftWindowsNTCurrent VersionWinLogon key value; 3. In the corresponding sub-window, right-click on the blank space, and from the pop-up shortcut menu, execute the “New” "New”/“String” command to create a string. Type the key name, and set the key name to “AutoAdminLogon”, and set the value of the key name to “1”; 4. Find the “DefaultDomainName” key name and double click it with the mouse, in the subsequent window In, enter the domain name to be logged in, for example, Department; 5. Double-click the “DefaultUserName” key name. In the window that opens, directly enter the username to log in to this domain, for example, “test”; 6. On the right side of WinLogon Child window with mouse Click on the blank space and from the shortcut menu that pops up, execute the “New”/“String” command to create a string type key name and set the key name to “DefaultPassword”, And set the value of the key name to the password of the user login system, for example, the login password of the user test is "123456"; 7. After completing the setting, when restarting the computer, we will find that it is automatically required to log in again. Go to the Windows Server 2003 system. To cancel the automatic login function in the future, you can set the “AutoAdminLogon” key value to “0” Tips for canceling the shutdown reason When you shut down the Windows Server 2003 operating system, a prompt window will pop up asking you to choose the reason for turning off the computer; although this method can enhance the security of the system and ensure that users manage and manage more effectively. Maintain the computer; however, every time you shut down or restart the system, you must choose the reason for the shutdown, which is not necessary. Therefore, in order to quickly shut down the computer, you can follow the steps below to cancel the reason for the shutdown reason: 1. Open the control panel window, double-click the “Power Options” icon, and in the subsequent power properties window, go to “ldquo; Advanced & rdquo; tab page; 2, in the "Power button" setting on this page, "When the computer power button is pressed," is set to "Shutdown", click "& OK"; OK & rdquo; button , to exit the setting box; 3, when you need to shut down later, you can directly press the power button, you can directly shut down the computer. Of course, we can also enable the hibernate function key to achieve fast shutdown and boot; 4. If the hibernation mode is not enabled in the system, you can open the power option in the control panel window, go to the hibernation tab page, and in the "will" ; enable hibernation & rdquo; option to select it. Fifth, call the Windows XP style interface After installing the Windows Server 2003 system into the desktop, we will find that the display style of the system desktop is "Windows classic style". After seeing this style, I feel a bit boring. Would you like to change the display style of the desktop? If you attempt to call other style interfaces by displaying the appearance settings of the properties, you will find that this "Road" is not possible; when called through Group Policy, it is found that only the current style can be selected. So, is there a way to call other styles, such as Windows XP styles? According to the following method, we can easily achieve the purpose of the call: 1. In the system's start menu, expand the Control Panel, Administrative Tools and Services window, and in the right sub-window of the corresponding service, use the mouse to select the "Themes" option; 2, carefully look at the parameters of the option, it is found that the service is prohibited by default, so we can not call other styles; 3, for this, we must start the service; double-click the service option with the mouse , then open the General tab, set the startup type of the service to "Auto", and click the "Apply" button; 4. At this time, "Service Status" is set to "Start" & rdquo; button is automatically activated, click the "Start" button, you can use the Themes service in the system; 5, return to the system desktop, and right click on the blank space, from the shortcut menu “Properties” command, then open the Appearance tab page, in which “windows and buttons & Rdquo; at the point, select Windows XP style or other display styles. 6. At this point, the toolbar menus, windows and other styles in the system will be displayed according to the specified style. 6. Adjusting the playback mode of Windows Media Player If you use Windows Media Player to play music, we also open multiple working windows, so we often need to switch back and forth between the working window and WMP playback interface, which will greatly affect Work efficiency. Now, you can adjust the playback mode of WMP by the following methods, so that the operator can control the playback of music without opening the main interface of WMP, so as not to affect other working windows: 1. Right click on the blank in the system task bar. From the shortcut menu that opens, execute the “Windows Media Player” command under “Toolbar”; 2. After that, the play button in the Windows Media Player interface will be automatically reduced and displayed in the system tray. With the button here, we can perform the music playback, pause, last or next command; 3, through this adjustment, we no longer have to use the program window and WMP playback interface. Switched back and forth. Adding a new user to the specified group When you want to add a new user to the Windows Server 2003 system, you find that there is no "user" icon in the system control panel window, so where do we start from the system? Add a new user to the specified group? Oh, Windows Server 2003 seems to be different! After several groping, I found a way to add new users to the specified group. The specific steps are as follows: 1. Right-click the “My Computer” icon on the desktop and execute from the shortcut menu that is open. ” command, pop up a computer management window; 2, expand the "local users and groups" folder in the window, and then select the "user" option under the folder, in this right sub-window , we can see all the users already in the current system, the user marked with a red cross indicates that it has been created but not enabled; 3. Right click on the blank space of the right sub-window, from the right-click menu Execute the “Add new user” command, in the subsequent window, enter the relevant information of the user to be added, and finally click the “Create” button to end the addition of the new user. 4. Want to let If the user is added to the specified group, you can select the “group” option, and then select from the sub-window on the right. To join the group name, and right click on it, execute the “Add to group” command in the shortcut menu; 5. In the subsequent interface, click the “Add” command to create the user created earlier. Add it in.