How to configure NAT server in Win 2003

Today, the rapid development of the Internet era, the human demand for computers is not just a simple calculation and browsing, but more potential for mining computers. In this article, we'll show you more in detail how to configure a Network Address Translation (NAT) server by using Windows Server 2003, through the "Routing and Remote Access" service, an internal network client using a private Internet Protocol (IP) address through NAT. The external interface of the server accesses the Internet to implement remote access.

How to configure routing and remote access to NAT server

When an internal network client sends a request to connect to the Internet, the NAT protocol driver intercepts the request and forwards it to the target Internet server. . All requests look like external IP addresses from the NAT server. This hides your internal IP address configuration.

Configure “Routing and Remote Access NAT Server:

In the Administrative Tools menu, check “Route and Remote Access”.

In "Routing and Remote Access" MMC, expand your server name (where server name is the name of the server you want to configure, then expand IP routing in the left pane.

Check General and select New Routing Protocol.

Click the NAT/Basic Firewall checkbox to select it, then click OK.

Right-click NAT/in the left pane Basic firewall, then click New Interface.

Click the interface that represents the internal network interface, and then click OK.

In the "Network Address Translation" property, click “ Connect the dedicated interface to the private network ” and click OK.

Right-click NAT/Basic Firewall in the left pane and click New Interface.

Click to indicate the external network interface Interface, then click OK.

In the "Network Address Translation" property, click "Common Interface to Connect to the Internet>

Click “ Enable on this interface NAT” checkbox to select it, point to The

NAT server can automatically assign IP addresses to internal network clients. You may need to use this feature if you do not have a DHCP server that has assigned address information to clients on the internal network.

How to configure routing and remote access to the NAT server to assign IP addresses and perform proxy DNS queries. The NAT server can also perform Domain Name System (DNS) queries on behalf of NAT clients. "Routing and Remote Access" is included in the NAT server pair. The Internet host name in the client request is parsed, and then the IP address is forwarded to the client.

To configure “route and remote access the NAT server to assign an IP address and represent the internal network client To perform a proxy DNS lookup, follow these steps:

Right-click NAT/Basic Firewall in the left pane and click Properties.

Click the Address Assignment tab, then Single Click the “Use DHCP to automatically assign IP address” checkbox to select it.

In the IP address box, type the network ID.

In the mask box Type the subnet mask.

Select the Name Resolution tab and click the “Use Domain Name System (DNS) Client” checkbox to select it.

If you To connect to the Internet using the demand-dial interface, click the "Connect to public network when the name needs to be resolved" checkbox to select it.

In the Demand Dial Interface box, check the interface you want to dial.

Select an app and click OK.

Note: After completing these basic configuration steps, the internal network client can access the servers on the Internet.

How to configure a Windows Server 2003-based computer to use a NAT server

Click Start, point to Control Panel, point to Network Connections, and then click Local Area Connection.

Click Properties.

Click Internet Protocol (TCP/IP).

Click Properties.

In the "Default Gateway" box, type the internal IP address of the NAT server.

Note: If the computer receives its IP address from the "Dynamic Host Configuration Protocol" (DHCP) server, click Advanced, click the IP Settings tab, click Add under Gateway, type NAT The internal IP address of the server, click Add, click OK, and proceed to step 6.

Click OK, click OK, and then click Close.

By using Windows Server 2003 to configure a Network Address Translation (NAT) server, mainly for home networks or small office networks, it is easy to use a single computer to share a single Internet connection.