Win2008 server prompts no registration category (80040154) What should I do?

Windows Server 2008 Provisioning Routing and Remote Access Service installation did not succeed, indicating that there is no registration category (80040154). Recently, users who use the Win2008 system have encountered such problems and do not know what to do. When faced with such a problem, how should we solve it? Now Xiaobian will talk to you about the Win2008 server prompts no solution category (80040154) solution.

The steps are as follows:

1. No registration category:

1. When the configuration routing and remote access are enabled, the prompt error is displayed as “No registration category” ( 80040154)” The following is a small series of steps to configure the error.

2. Click on the "Server Manager" icon at the bottom left of the system. Select “roy> click Add Role.

3, server role configuration check "Network Policy and Access Services"

4, role server check "Rolling and Remote Access Service" and 2 sub-services "Routing" and "Remote Access Service"

5. After confirming the relevant information, click Install to start the installation (note that the related prompts need to restart the server). After the installation is successful, confirm the service installation is complete and click Close. After rebooting the system.

6, after restarting the system, we can press the role of the server manager under the network policy and access to the server's routing and remote access services, in general, the state of the disabled we need more in-depth operations .

7, or in the server manager, we choose to configure the following services to choose a configuration for routing and remote access services. Select the startup type to change to Auto and click on Start below.

8, then come to the control panel → system and security & rarr; windows firewall & rarr; open or close the windows firewall, the windows firewall is closed.

Second, configure and enable routing and remote access:

1, after the above steps are completed, we return to the routing and remote access module under the role, the mail click operation in the pop-up drop-down In the box, select “Configure and enable Routing and Remote Access”.

2, in the routing and remote access server installation wizard we can choose the operation we need, here Xiaobian Bin brother chose the second simple to do a NAT, the IP inside the LAN Unifiedly map the IP address of an external network to go out.

3, then the next step after selecting the external network card, the next step is completed, and there is no error. Back to the routing and remote access module we can see the familiar interface!

The Win2008 server prompts that there is no registration category (80040154) solution will be introduced to you here. If you are also using the Win2008 system, encounter the same problems as above, do not know how to solve the above solution, you can help solve the problem.