Close the IDE channel to improve the efficiency of windows2008

Windows 2008 system is very popular among users because of its high security, strong reliability and very strong stability. However, with the increase of usage time, users find that the system is running more and more efficiently. Low, there are many factors that cause this phenomenon. The following is a trick for the master to teach everyone to close the idle IDE channel to improve the efficiency of the system.

close the IDE channels, improve operational efficiency windows2008:

In general, WindowsServer2008 system during boot up automatically all the hardware devices loaded successfully, this process consumes system A lot of resources and a lot of waste of time; in fact, many hardware devices in the system are rarely used, and the use of these idle hardware devices can effectively improve the efficiency of the server system. For example, when we open the device manager window of the system under Windows Server 2008, and expand the "IDEATA/ATAPI controller" project, we can see that the system contains two IDE channels, which are under the old version system. Called the main IDE channel, the secondary IDE channel; however, in the WindowsServer2008 system environment, the IDE channel has no primary and secondary points. Considering that many ordinary friends usually use only one hard disk device in their computer, we can completely shut down another IDE channel that is idle to improve the system startup speed.

When closing the use state of the idle IDE channel, we can right-click one of the IDE channel options in the device manager list window and execute “property from the shortcut menu that pops up. ; command, open the property setting interface of the corresponding IDE channel; click the “Advanced Settings” tab in the setting interface to enter the label setting page; in the setting page, we can see the specific transmission mode of the current device, this Note that the IDE channel is currently in use and the other IDE channel is idle. At this point, right-click on another IDE channel that is idle and execute the “Uninstall” command from the shortcut menu, so that the idle IDE channel can be closed.

After a long time of use, the system is running slowly. There are many reasons for this situation. Users need to organize them in time. The above-mentioned shutdown of the idle IDE channel is only to optimize the operation efficiency. In a small area, in order to ensure that the system is running more efficiently, it needs to be combined with other aspects of the system to be feasible.