Windows system how to ping

                                                                                                                                                                                         

In the process of using computer
, we often encounter a variety of network problems, for those who do not love hands-on
computer
fans, encounter The small network
problem will be helpless. You need to ask some experts to help. In fact, many times it is just a simple question. As long as you are diligent in finding information and hands-on, I believe you can become a real computer enthusiast. This article is a very simple computer trick to teach you how to use the Ping command.

Ping command is actually a very good network fault
diagnostic tool, I believe that reading this article will definitely help you. If you have problems with your network, try the following:

First use the Ping command to diagnose whether the local TCP/IP protocol is installed properly. The detection method is as follows:

1.) Find it from the beginning of the computer. Run, then enter the " CMD “ command in the run dialog box, then press the Enter key, type the CMD command interface, as shown below:

Enter the command character and press the Enter key (or point After confirming the key), you can enter the CMD command operation box, then we can input the ping command, enter: ping 127.0.0.1, and then press the Enter key to start checking whether the local TCP/IP protocol is installed properly.

The test results show that it can respond normally. At this point, it can be explained that the local TCP/IP network protocol installation is normal. In fact, this step is generally normal, unless the network card or driver is not installed, and the network card is faulty. .

The following can also use the Ping command to view network-related information such as the computer's IP address, subnet mask, and gateway address by continuing to type: ipconfig /all, and then press Enter to confirm the test. .

The above local connection information is also important. The IP Address in the above figure represents the local IP address, and the Default Gateway is the
router
address. These are in some aspects such as fixed local IP, viewing router
address, etc. Finally, how to ping the website, that is, whether our computer and the Internet are connected, the method is in the above command operation. You need to ping the website to see if the computer can access the website. For example, Ping Computer Pepsi. In the command box, type: ping www.4140.com.cn -t and press Enter to confirm.