How to solve the mouse light after the win7 computer is turned off

When the computer is turned off, the mouse light is still on.

The boot button enters the BIOS setup interface, because the menus of different motherboards are different. For details, please check the computer manual, or go to the official website to view related information. .

First, enter the Power Management tup option

USB Resume from Suspend (enables USB wake-up function) Enaabled (enable) At this time, the computer is turned off, the mouse light It will also light up, just shake the computer and wake up the computer.

Note that the Eup Support item here is turned off, so it can support the wake-up function (the mouse light is also on after the shutdown). Only when you change it from Disabled to Enaabled, the mouse light will not light up.

Different motherboard menus are different, but just enter Power Management tup (ErP) and rarr; the default Disabled is set to Enabled.

Turn on the power save mode, the mouse light will not light after the power is turned off.

For motherboards that support EuP energy-saving design, if the EuP option in the BIOS is turned on, the system cannot be woken up from the shutdown state network. However, if this is set, the mouse will not light up after shutdown.

To wake up, you can set this in the BIOS: set the EuP Support option to Disabled and set the Resume By PCI/PCI-E/Lan PME option to Enabled. (Enable).

If EuP power-saving is enabled, it can also be controlled by jumpers. For example, MCP61M-M3 V7.1 motherboard, only need to set the jumper to 2-3 pins to turn off the EuP function.