How to use the ipconfig command under WinXP system? The method used by the ipconfig command under WinXP system

The ipconfig command does not know if you have used it? It can be used to view various information such as the IP address of the machine, and it can also check whether the manually configured TCP/IP settings are accurate. Maybe many partners don't use the ipconfig command very much, so today I will share with you how to use the ipconfig command under WinXP. Have a friend who needs to go and have a look!

Method /Step:

1. ipconfig is a DOS command because we first need to open a command prompt (CMD). We open the start menu, find the run options, then type CMD in it and hit enter, so we enter the command prompt input interface.

2, before using a command, the first thing we should do is to view the help documentation for this command. Ipconfig view help command statement for ipconfig /? , we only need to enter this command will appear ipconfig help documentation, which describes the use of ipconfig in detail, such as the parameters that can be attached, the specific meaning of each parameter and examples, very detailed.

3, after reading the help documentation, we can do it. First of all, we often use the ipconfig command. When using ipconfig without any parameter options, it displays the IP address, subnet mask, and default gateway value for each configured interface. If you have a virtual machine and a wireless network card installed, their information will appear here.

4, then we look at the ipconfig /all command, compared to the ipconfig command, the information displayed after adding the all parameter will be more perfect, such as IP host information, DNS information, Physical address information, DHCP server information, etc. When we need to know the IP information of this machine in detail, we will use the ipconfig /all command.

5, there are two more commonly used parameters are release and renew, in general, these two parameters are used together, ipconfig /release to release the existing IP address, ipconfig The /renew command issues a request to the DHCP server and leases an IP address. However, in general, the IP address obtained by using ipconfig/renew is the same as the previous address, and a new address will be obtained only when the original address is occupied.

6, the above is often used when we use ipconfig, after reading the help documentation, we found that ipconfig has many other parameters, such as displaydns parameter is to display the local DNS content, flushdns parameters In order to clear the local DNS cache content, these things do not need us to remember, just need to know that ipconfig has this feature, and can be queried when needed.

The above content is a tutorial for you to use the ipconfig command under XP system. You may wish to collect this article first. When you forget the command, you can check it. Hope can help everyone!