How does Win7 configure the switch? Win7 configuration switch method

How does Win7 configure the switch? A switch is a network device used for electrical (optical) signal forwarding. If you want to achieve common Internet access, you have to configure the switch. Many friends may not understand how to configure the switch. In fact, it is not difficult to configure the switch. The following is a small series of Win7 systems. Let me explain the specific operation method of configuring the switch. Let's take a look.

The operation method is as follows:

1. Click the "Start” button, and click on the "Accessories" option in the "Program" menu. Terminal";

2. Double-click the “Hypertrm” icon to bring up the dialog shown in Figure 5. This dialog box is used to oppose a new HyperTerminal connection item;

3, in the "Name" text box, type the name of the terminal connection item to be newly created, which is mainly for easy identification. There is no special requirement, we type "&Cisco"; if you want to choose a favorite icon for this connection item, you can also select one in the icon bar of the figure below, and then click the "OK" button.

4. In the “Connect” box, select the serial port of the computer connected to the switch using the “Drawdown” box. Click “OK" button;

5. Select “9600” in the “Baud Rate” drop-down list box, because this is the highest communication rate of the serial port, and all other options use the default. value. Click the “OK” button.

The above is the operation method of configuring the switch under the Win7 system brought by Xiaobian. If you need to configure the switch, you can refer to the tutorial to operate. Thank you for reading, please pay attention to this website for more content!