Win7 system Lenovo notebook boot prompt pxe-mof:exiting pxe rom reasons and solutions

The Lenovo laptop of the Win7 Ultimate system will display every time: pxe-mof:exiting pxe rom, what should I do? The following small series for everyone to share the solution.

Cause analysis:

This prompt is caused by the startup of the network card in the laptop,

Idea series notebook setting method:

1 Press the F2 hotkey to enter the BIOS setup interface;

2, use the arrow keys to move to the “Configuration” menu, and then use the down arrow key to select “PXE Boot to LAN”. Press the Enter key;

3. In the pop-up window, select “Disabled” and press Enter (Enabled means enabled; Disabled means disabled);

4 Then press “F10” (some of the books need to press FN+F10) in the pop-up dialog box, press the “Y” button to restart the notebook.

Lenovo K series, E series, V series, B series, M series setting method:

1, press F1 (some books press FN+F1) to enter the bios setting interface;

2, select “Config” menu, use the keyboard down button to move to the “Network” menu and press the Enter key;

3, use the keyboard up and down Move to the “Ethernet LAN Option ROM” option and press the Enter key;

4. Use the up and down keys on the pop-up box to select “Disabled”; press the Enter key;

5, then press “F10” on the keyboard (some machines press “FN+F10”), press “Y” in the pop-up prompt box.

Expanding reading:

Win7 system booting atibtmon.exe error how to do? Win7 notebook appears atibtmon.exe solution

The above is the Win7 system Lenovo notebook boot prompt pxe-mof:exiting pxe rom reasons and solutions for the entire content of the introduction, friends with the same problem can follow the above The method is set to solve!