Win7 system prompts the firewall can not change some settings error code 0x8007437 reasons and four solutions

win7 system prompts "firewall can not change some settings, error code 0x8007437", what should I do? The following small series will bring the win7 system prompts the firewall can not change the reason for setting some error code 0x8007437 and four solutions, let's take a look.

Fault reason analysis:

1, it may be that the firewall service is disabled, check if the firewall service is enabled;

2, it may be that your win7 firewall was originally The system you downloaded online has been streamlined, and the firewall function is incomplete.

3. It is also possible that the virus has broken the function of the firewall.

Workaround 1:

1, run services.msc Open “service” console;

2, double-click Windows The FIrewall service opens its "property", select “auto”;

3, switch to “login” tab in the “Startup Type” tab> , first select “local system account", click"application", do not close the window;

4, re-check “this account”, click “Browse - Advanced - Find Now” In the account list, select "LocalService", click “OK">, and then click "Apply", if prompted to type the password, please clear the password and click Apply;

5 , and return to the "General" tab, if the service status is "Already stopped", click "Start" and confirm.

Solution 2:

1, click [Start]->[Run];

2, enter [services.msc], find [Windows Firewall/Internet Connection Sharing Service];

3, Enable and [Auto]

Workaround 3: Use DOS Command

1, View Settings: netsh firewall show config 2. Close windows firewall: netsh firewall set opmode mode=disable

3, open windows firewall: netsh firewall set opmode mode=enable

solution four:

1, click “Start”, type “Notepad” in the "Start Search" box, and then click “Notes>;Notebook>;

2, Copy Paste the text below, then paste the text into “Notepad :
sc config wuauserv start= autosc config bits start= autosc config DcomLaunch start= autonet stop wuauservnet start wuauservnet stop bitsnet start bitsnet start DcomLaunch < Br>

3, click “file”, click “Save as ”, then Repair.bat;

4, in the "Save Type" box click "All Files" (* *);

5, in the "Save Location" box Click “desktop", then click “Save”;

6, click “Exit”;

7, right click on the "File" menu Click the Repair.bat file that you saved in step 5, and then click “Run as administrator”. This will launch the required service. If you enter an administrator password or make a confirmation prompt, type the password, or click “Continue 

8, try reapplying the settings.

Related reading:

Win7 Ultimate 32-bit system opens the firewall prompt "Error 3: The system can not find the specified path" solution

win7 system open firewall Prompt the firewall can not change the reason and solution of some setting error code 0x80074200

The above is the reason why the win7 system prompts the firewall can not change some setting error code 0x8007437 and the four solutions all the contents, simple settings After that, you can open the firewall smoothly, and there are friends in the same situation, please refer to the contents of this tutorial in time to solve it.