How to set up Win8 system switch? How to set up the switch in Win8 system

How to set up Win8 system switch? For the switch, this should be familiar and not familiar with it! What is the role of the switch, it is used to achieve several computers for us to access the Internet at the same time. Recently, users of the Win8 system said that there are several computers in his home, but only one network cable, so I bought a switch, I want other computers to be able to access the Internet at the same time, ask how the switch should be set up to achieve several computers at the same time. ? The following small series will bring you the Win8 system to set up the switch method, let's take a look!

The steps are as follows:

1. This kind of home is a small switch. There are only a few interfaces. Home is enough. Other switches are set up like this. First, look at the picture as shown below: the back is the slot of the network cable;

2, this is the side of the switch, usually the interface of the power line, of course, the possible location of different switches is somewhat Different, but generally on the side.

3, this is the front, mainly the indicator light of the switch, etc., can be used here to determine whether your network cable is connected successfully

4, let us come Start setting up the switch. The power cable connection in the figure below is successful. After the power connection is successful, there will usually be a light in the pope and the front.

5, next to us, the network cable is connected, first connect the external broadband network cable to one of the interfaces of the switch, and then connect the switch and your computer with the network cable. During the connection process, you can Look at the front indicator light, if it is flashing, the connection is successful.

6, parsing us need to set up a host, the IP address is fixed, such as 192.168.0.1 as shown below

7, if your computer set the IP as above , then the IP of several other computers should also be set on the same network segment, that is to say set to 192.169.0.* (* indicates any number below 255.) After setting, we test whether it is successful or not. Run the input “cmd” Then PING command to see if the connection is successful

8. Next, we will return to the host computer, which is 192.168.0.1, click on the network connection. Broadband connection, right click --- attribute --- advanced. Then set up the shared network. After setting up, the broadband connection will display the words “shared”, as shown below. that's it.

If you have a few computers in your home and want to implement several computers at the same time, you can try the above methods. Thank you for reading. Please pay attention to this website for more content!