ASUS Win7 install KB3133977 patch after the brick solution solution

In recent days, many netizens have reported that their Win7 installation patch KB3133977 directly changed bricks. In fact, this phenomenon mainly occurs in the Win7 system with ASUS motherboard. The root cause is Secure Boot. The technology is mainly introduced by Win8, and Win7 does not support this technology, and the patch KB3133977 pushed by Microsoft is installed by default. For this case, the following small series for everyone to offer ASUS Win7 patch KB3133977 brick solution, if If you encounter this problem, you can install the following steps to set it up.

It is worth mentioning that only ASUS motherboard users have found this problem, which is mainly related to UEFI settings. The brand motherboard has not been reflected by users, but anyway, it is recommended that all Win7 users temporarily Do not install the KB3133977 patch.

The solution steps are as follows:

First, enter the UEFI mode when entering the BIOS, and then select the advanced mode-start-safe boot, as shown in the figure.

Second, then change the default Windows UEFI mode to the Other OS option in the OS Type as shown.

Three, then press F10, click the [OK] button in the pop-up reminder box to restart the computer, as shown.

At the end, enter UEFI again to confirm whether the platform key status has been switched to Unloaded. If so, you can reboot into the system again.

The above is the solution for the brick-breaking phenomenon after the ASUS Win7 installation patch KB3133977 brought to you by everyone. I hope that you can help everyone. If you still have any questions, you can give it in the comment box below. We leave a message. We will do our best to answer for you. Thank you for your continued support, and please continue to follow this follow-up tutorial and software.