Win7 Prompt Diagnostic Policy Service is not running Unable to Diagnose Check Network Solution

In Win7 system, when we encounter a network failure, we will use network diagnostics to check the problem. However, sometimes when using network diagnostics, the prompt “Diagnostic policy service is not running” will appear, causing the network to fail diagnostics. So how is this handled? Below, please take a look at the small series.

The solution is as follows:

1, start → run → enter: services.msc Click OK (or press Enter) to open the service.

2. In the service, find: Diagnostic Policy Service ▶ If it is not enabled, right click to start.

3, if it can't be started (the menu is gray), that is, the startup mode is incorrect, double-click the service, or click the property to open the service → start type → click ▼ to adjust To automatic or manual → application → start → OK;

4, in addition to the Diagnostic Policy Service service needs to be turned on, you can also open the following two services:

diagnostic Service host

diagnostic system host

5. If the service is enabled and there is a prompt like error 1079, you can click on the login tab of the service to place the current account. Cover it in.

The above is the processing method that Win7 can't diagnose and check the network prompt "Diagnostic policy service is not running". Through the above method, network diagnosis can be used normally.