It's easy to get the activation problem of Win10

  

Windows 10 is free for one year, and the installed capacity soars, attracting countless users to upgrade. However, behind the free upgrade, there are also a lot of activation problems. So let us start with the basic policy of activation, fully understand the activation mechanism of Windows 10, find the root cause of the problem that can not be activated, and then get a smooth activation method, so that everyone can use activated Windows 10.

Small knowledge: Two activation methods for Windows 10

Windows 10 uses two activation methods. One is to use digital rights activation, and the other is to use a 25-character product key activation. Digital rights is a new activation method in Windows 10 that does not require a user to enter a product key to activate a product. It is a set of information recorded on a Microsoft activation server. There are many ways to install and upgrade. So, which way is your Windows 10 activated? Please refer to the table description (see Table 1).

Table 1

1. upgrade installation can not be activated

If the system previously running genuine Windows 7 or Windows 8.1, then upgrade to Windows 10 through the system update, The system automatically activates online and creates digital rights for the current device to be saved on the server.

Some user computers are inactive for some reason before upgrading Windows 10, and the inactive state remains after upgrading Windows 10, so Windows 10 is inactive and cannot be activated. At this time, you need to roll back to the original low version, activate Windows with the original version key, and then upgrade to Windows 10 to be automatically activated. If there is no automatic activation after the upgrade, please go to the “Update and Security” window of the system settings and click “Activate” to activate manually (Figure 1). If you have upgraded to Windows 10 but failed to activate, it may also be because the upgrade server is busy, wait a while and then go to the control panel to try to activate.

Tip:

Windows 7 view the activation status of the method, click the Start button, right-click & ldquo; Computer & rdquo; and choose & ldquo; Properties & rdquo ;, & ldquo in ;Windows activation” The way to view it in Windows 8.1 is to right-click on the Start menu and select “Control Panel", click “System & Security", and then click "System", under "Windows Activation".

Other users run the Windows 10 installation package on the lower version of the system. When the installation is not performed, the installation is not selected. Instead, the installation is selected. The installation program does not determine the activation status of the original version. Therefore, Windows 10 after installation cannot be activated automatically. At this time, if you enter the original Windows 7 or Windows 8.1 product key, you will be prompted "This product key is not available" and generate an error code (error code 0xC004C003, 0xC004F034 or 0xC004F050). In this case, you need to uninstall Windows 10, fix the low version system, and then perform the upgrade installation and activation.

Tip:

To ensure successful activation, you can perform a factory reset and then upgrade to install Windows 10. To upgrade from ISO or installation media, select “Upgrade this PC” instead of "Install now", this will ensure that the Windows 10 version matches the currently running system version.

Small tips:

Be prepared, just in case. Please create a recovery partition and restore the boot disk before the upgrade, and copy the system backup of the recovery partition to the recovery boot disk, so that the upgrade is not successful, and the system is restored when the rollback encounters an accident (Figure 2).

2. reinstall Windows Activation of
10

reload the need to reactivate after 10 Windows? This issue cannot be generalized. If the previous Windows 10 was activated using the digital rights method (see the table above), you can choose to “skip” when reinstalling the system to enter the key. The digital rights activation system of the server is automatically invoked after the installation is completed. However, it must be noted that you must log in with your original network account and you cannot use a new account. If the previous Windows 10 is a product that is activated by a key installation, you will need to enter the key when reinstalling. Before and after reinstallation, check the activation status by “Setting →Update and Security→Activate"

Tip: Reset Product Key Forced Activation

In the "Run" window, enter the "SLMGR.VBS –REARM" command, confirm and restart, and enter the product key. Then enter “SLMGR.VBS –ATO” to force activation. If you are unable to enter the product key, you can use the “SLMGR.VBS -IPK XXXX-XXXX-XXXX-XXXX” command (replace X with the product key) and restart.

3. New device new installation activation

Install Windows 10 on a brand new device, or install a high version on a Windows 10 device that already has a lower version (such as Home version) installed Windows 10 (like the Pro version) requires product key activation (Figure 3). The system where the product key is installed is automatically activated after the installation is completed.

4. Preview users upgrade activation

Windows 10 Insider Preview version preview experience members to use, as long as the low version preview version before the upgrade with active, the upgrade It will be activated automatically. To install Windows 10 Insider Preview on a device that has not been installed with Windows 10 Activation, you need a product key. If you want to get the latest Windows 10 Insider Preview build, but the device is running Windows 7 or Windows 8.1, you need to upgrade to Windows 10 first using the free upgrade option. After that, go to “ Start & Rarr; Settings & Rarr; Update & Security & Rarr; Advanced Options & rdquo;, then select “ Get Insider Version & rdquo;, become a member of the Windows Preview Experience Program.

Small Tips:

Starting with Windows Insider Build 10565, Windows 10 can be activated directly using the Windows 7 or Windows 8.1 key. The specific method is to select “Set → Upgrade & Security → Activate & rdquo;, then click “Change Product Key & rdquo; (Figure 4).

The above article can help you get the activation problem of Windows 10 comprehensively. I hope everyone likes this article and really solves the activation problem of Windows 10.

Copyright © Windows knowledge All Rights Reserved