Haier computer U disk reloading system win7 step graphic tutorial

Now, many small partners have a beloved laptop, but they are suffering from the current system too card, or the system can not be used normally. It doesn't matter, Xiaobian teaches you: Haier computer U disk reloading system win7 step graphic tutorial! First, make a U-speed U disk boot disk 1. Download and install the U disk boot disk production software, this tutorial takes "<U speed" as an example.

2. Open "U-speed" U disk start flat production software, wait for the interface to display " Please insert the U disk that needs to make the boot disk " Insert the prepared U when prompted Disk, and then make the following picture selection for the interface, make the boot disk:

After 3.1-5 minutes, the interface displays “U disk boot disk creation completed”, click “Delete” & rdquo; 4. Through the software's own "start simulator" to carry out the boot test of the U disk boot disk, check whether the U speed U disk boot disk production is successful, press and hold the "Ctrl+Alt" key combination. Close the window, the interface as shown in the figure shows that the boot disk is successfully created:

5. Copy the downloaded ghost win7 system image file to the U-speed U disk boot disk.

END II. Reinstalling the Win7 system on Haier computer 1. Insert the USB flash drive into the computer to restart, wait for the Haier brand LOGO logo to appear on the boot screen, press the one-button USB flash drive to start the shortcut key. & rdquo; F12 & ldquo;, enter the startup item selection window, use the up and down direction keys to select the U disk start at the beginning of USB, press the Enter key to confirm, as shown below:

2. Enter U speed After the main menu, select [02] to run the U speed win8PE installed maintenance version (new machine), as shown:

3. After entering the PE system desktop, it will pop up the PE system. System installation tool "U speed one-key restore system", the installation tool will automatically load the installation files required by the system image package, we just choose to install the system disk partition C drive, then click the "OK" button, as shown Shown:

4. In the next two windows that appear in turn, select ”determine “ and ” is “. 5. After completing the above operation, the computer will restart automatically. When the computer restarts, the U disk must be unplugged from the computer USB interface (otherwise, the installation will fail), the subsequent system installation will be carried out automatically, and the subsequent settings will be completed to enter win7. The system, as shown:

6. The tutorial on using the U disk to reinstall the Win7 system of Haier computer is over here. I hope this tutorial can help you. Please forgive me. END this friendly reminder note Don't forget to unplug the USB flash drive from the USB interface when the computer restarts! ! ! Ghost win7 system image file must be downloaded from the network beforehand