What should I do if the win7 system cannot enter the router settings?

has win7 system users reflect that the input router address can not enter the router settings page, then what is the reason for the router interface can not enter? There are many possibilities for not being able to enter the interface. First, we must first confirm that the router is not damaged and then eliminate it according to the following reasons and solutions. Share the solution below

1. First connect your computer and router to the network. , ADSL cat out;

2, then set your IP address to 192.168.1.10 or 192.168.0.10, subnet mask 255.255.255.0, default gateway 192.168.1.1 or 192.168.0.1, DNS is set to your own location, then click OK;

3, then enter 192.168.1.1 in the IE address bar and press Enter. The screen prompts you to enter your username and password. Fill in the router default username and password. Or then open IE browser;

Enter 192.168.1.1 in the address bar and press Enter. The screen prompts for the user name and password. Fill in the router default 啲 username and password to see the manual. Try your router address to set.

4. After entering, the router setup wizard will pop up. If it doesn't pop up, it will be fine. Click on the “Setting Wizard” on the left side, and the welcome message will appear on the right. Click “Next” &

5, to select "ADSL virtual dialing", and then click Next;

6, enter your username and password, you must enter the username you used when dialing with ADSL and Password, and finally click Finish.

7, router 192.168.1.1 can not be opened when you can also solve the problem by restoring the factory default, you can pass a small hole from the top. With a pin Press the small button at the time to initialize the factory default settings, and then reset the router. Others can be operated according to the setup wizard without setting. If it is ADSL, please choose PPPOE. Then enter your online account and password. Yes.