Win10 official version of the network connection is limited /no access to the network how to solve?

Everyone knows that the current wireless network is widely used, but recently Xiaobian will upgrade the system to the latest version of the Win10 official version of the system, the network is often found automatically on the Internet process Disconnect, while the “Network Icon” on the taskbar displays a yellow exclamation point and displays “Restricted” when viewing the wireless connection status. Then Win10 official version of the network connection is limited /no access to the network how to solve? After multiple search and repeated attempts, finally solved the problem, the following small series introduces the solution, let's take a look!

Win10 official version of the network connection limited solution

1, when Win10 network connection is limited or a yellow exclamation mark appears, right click on the taskbar & ldquo; network connection & rdquo; icon, from its right Menu selection & ldquo;Network and Sharing Center”.

2, after entering the "Network and Sharing Center" interface, click the "Change Adapter Settings" button in the upper left corner of the window, as shown:

3, this will open the "Network Connections" window, right-click the "Network Restricted" connection, select the "Disable" item from its right-click menu.

4. After the corresponding network connection icon is disabled, right click on the network connection again and select the “Enable” item from its right-click menu.

5. At this time, for “local connection”, the IP address will be automatically obtained from the gateway and connected. For “Wireless Network”, you need to click the “Network Connection” icon in the lower right corner of the taskbar, and click the “Connect” button from the open extension panel. The network connection will be normal.

6, of course, resulting in "limited network connectivity" or "no access to the network" problem is multifaceted.

When such a problem occurs, we need to check if the router can connect to the Internet normally. In the router web management interface, make sure that the network connection is normal. Otherwise you need to detect the router side settings.

7 In addition, we can also use the "360LSP repair tool" to repair network failures. This tool can be used to repair the LSP protocol and solve the problem of not being able to access the Internet.

8, at the same time, with the "360DNS optimization" tool can optimize the network DNS filtering function to solve the problem of "network instability" or "can not open the web".

9, of course, if you upgrade to the Win10 official version of the system, it is recommended that you can not access the Internet, "limited network connection" or "no access to the network", it is recommended to use “Drive Life 6” Update or fix the NIC driver.

10, to ensure that the relevant "network service" is in normal startup state:

Right-click the "Windows" button in the lower left corner of the desktop, select "ld" from its right-click menu. Computer Management & rdquo; entry.

11. From the "Computer Management" window that opens, click "Services & Applications" to expand the "Services" and find "Wired AutoConfig" and “ WLAN AutoConfig”Two service items to ensure that these two service items are in normal operation, otherwise click the “Start this service” button in the upper left corner to enable this service.

The above is the introduction of Win10 official version of the network connection limited /no access to the network, the article is very detailed, as long as you follow the above steps, you can solve this problem!