Win10 disk sometimes will use 100% of its own solution.

Many of the partners who have just installed their own computer on the Win10 system will find that the win10 disk will sometimes use 100%. Now, the solution is coming! If you don't know what the win10 disk takes up 100%, you can refer to the steps below.

win10 disk usage 100 Solution

1. Family Law Group

family group is occupying one of the reasons the hard disk. Some users have reported that the hard disk usage rate has dropped from 90% to 10% after the family group is turned off, but this method may not solve the problem for users who have not joined the home group.

Enter services.msc in Windows search, find “HomeGoup Listener” and “HomeGroup Provider” two services, right click to enter "properties", stop running and set the startup type to "ld"; Disable ”.

Method 2. Virtual memory (use with caution, it will lead to unknown problems, recommend more than 8GB memory users try)

Win8/8.1 defaults to virtual memory, he will turn some applications of memory Stored in the hard disk to avoid the situation that the physical memory is not enough. The low-end computer turns on virtual memory, which can improve the running efficiency, but it also brings the burden on the hard disk. If the user's physical memory is 4GB or even 8GB, you can try to reduce the virtual memory, but it is better not to be lower than 2048MB.

Right click on “this computer", click “properties", click “Advanced System Settings"“Set"““Advanced", then click on the virtual memory column &ldquo ;Change” allocate virtual memory as needed.

Method 3.IPv6

Under Win8/8.1, the IPv6 function is enabled by default, and the hard disk usage rate is high. It has some responsibility. Therefore, users who do not use IPv6 are advised to turn it off.

Open the Network and Sharing Center, click on the "Change Adapter Configuration" button in the upper left corner, select the NIC you are using, right click, and then click "Attributes", the slider pulls down to find IPV6 The option is turned off.

Method 4. Windows Defender

Windows Defender scans the hard disk regularly. In the past version, this feature can be turned off, but after updating Win10 Preview 9860, it can't turn off regular scanning. As a result, the hard disk usage rate remains high and the system is stuck. Users can try to use Group Policy to limit Defender's scheduled scan or turn off Defender to solve the problem.

Enter gpedit.msc in the search bar to open the Group Policy Editor, navigate to “Computer Configuration - Administrative Templates - Windows Components - Windows Defender - Scanning “ in the specified different days of the week running plan Scan & rdquo;Configure to “Enabled”Select settings based on the content in the help. Or turn it off directly in the Windows Defender settings internal management options.

Method 5.Windows Search

For older computers, Windows Search uses a lot of system resources and can be turned off. But the negative effect is that you can't use smart search, you will lose a good integration experience in Win8 or Win10.

Users need to use the above methods with caution. After testing, I found that "Windows Defender" can be effectively turned off in the "Win10 preview version 9860”", but it must be used with caution, because it is very likely because Defender cannot be reopened for various reasons. Turning off or reducing virtual memory can cause unknown system problems, such as the disappearance of thumbnails when the settings are correct.

Method 6. The ultimate solution is to solve all problems with SSD solid state drives.