Winxp computer boot blue screen Prompt error code: 0X00000024 solution

After hitting a few computers, what hardware error occurred, the blue screen code 0X00000024 is displayed. The specific situation is:

1. A blue screen when booting up

2. Display blue screen code 0X00000024

3. Enter the PE system with a USB flash drive, you can see all the drive letters. , but only the c drive can not enter

4.PE disk debris cleaning tool can not display the C drive.

Software Name:

WinPE U disk boot version Chinese installation version

Software size:

38.4MB

updated:

2014-02-21

1, U disk mounting PE

u find an unused disk, Install the PE system on the USB flash drive. There are downloads available above.

2, BIOS setting u disk priority start

Set the boot order in the computer BIOS, turn the u disk boot to the first one, in order to enter the PE system. When entering the u disk system, choose to enter winpe, I chose the first one.

3. Run the command

Under winPE, press win+R, run cmd, enter the command “chkdsk c:/f”, the command may have to run for a long time. I have more than 130,000 files on this computer disk. I have been running for nearly 2 hours. I have to wait patiently for more files.

4. Wait for the end of the run

Wait for the end of this command. After the end, pull out the u disk and restart the computer. At this time, the system is entered, the disk needs to be self-tested, and the system can be entered after the self-test is completed.

Note: The system I recovered successfully is XP, I have not tried win7.