Win7 official flagship system computer automatically shuts down after the computer shutdown

installed the win7 official flagship system of the HP laptop, after using it for a period of time, encountered such a phenomenon, the computer automatically turned on after shutdown, encountered How to solve this kind of fault?

One: The system setting is incorrect

Reason analysis:

Not only Win7 system, all Windows operating systems by default, when When the system is faulty, it will restart automatically. When the user shuts down, if there is an error during the shutdown process, the computer will restart.

So you can solve the problem of automatic restart by simply turning this feature off.

Solution:

1. Select “My Computer” on the desktop, press the right mouse button, and select “ldquo; Properties” in the pop-up menu bar, as shown in Figure 1. Show:
Figure 1 Right-click computer properties

2. In the pop-up "System Properties" window, click on the "Advanced System Settings" in the upper left of the window, as shown in Figure 2:
Fig. 2 Advanced System Settings

3. In the “System Properties” window, select the “Advanced” tab. In the “Startup and Recovery” section, click “Settings” & rdquo; ;, as shown in Figure 3:
Figure 3 Click Settings

4. In the "Startup and Recovery" window that appears, uncheck " System Failure" under the column ; Automatically restart & rdquo; checkbox, and click & ldquo; OK & rdquo;, as shown in Figure 4:
Figure 4 Cancel click to automatically restart

5. Confirm and close before opening The program window can solve the problem that the computer automatically shuts down after the computer is turned off due to the incorrect setting of the Win7 official flagship system. .

2: Power Management

Cause Analysis: Shutdown is closely related to power management. The cause of shutdown failure is likely to be caused by poor power management.

Solution:

1. Click the "Start” button and select “Control Panel", as shown in Figure 5:
Figure 5 Start Control Panel

2. In the control panel interface, select “System and Security", as shown in Figure 6:

PS: If the control panel that appears is not the same as the screenshot of the computer technology network, then You can set the "View Mode" in the upper right corner of the control panel to set it as a category, as shown in Figure 6.
Figure 6 System and Security

3. In the "System and Security" window, click on "Power Options", as shown in Figure 7:
Figure 7 Power Options

4. As needed, as shown in Figure 8. If you are using the power option of “High Performance” when the failure occurs, then click to select the high performance, click “Balance” or “Energy Saving”, and so on, change the power plan. It can often solve the problem that the computer automatically turns on after the computer is turned off due to the incorrect setting of the Win7 official flagship system.
Figure 8 Change power plan

Three: USB device

Cause analysis: Now USB devices are more common, such as U disk, mouse, keyboard, Modem, etc. These USB devices are also very It is easy to cause a shutdown failure.

Solution:

When the above fault occurs, you can unplug all the USB devices connected to the computer and then perform the shutdown operation. If you are sure that the USB device is faulty, it is best to replace the device, or connect an external USB Hub to the USB Hub instead of directly connecting the USB device to the USB interface of the motherboard. Thank you for reading, I hope to help you, please continue to pay attention to this, we will try to share more excellent articles.