Let the water injection U disk appear original

The U disk, which is beautifully packaged and well-packaged, found that the capacity was far below the nominal capacity during use, and some even failed to reach half the capacity. This is the "water injection" U disk. How to debunk "water injection" rd disk; U disk ghost trick? In the past, people have to expose the “water content” of the U disk, and always seek a tool that can detect the U disk chip and capacity to find out its true capacity. Now, we don't need to be so troublesome, as long as a free 360 ​​security guard tool software can solve the problem. When you buy a USB flash drive, with a 360-equipped notebook, you can make the parallel USB flash drive appear. The specific identification method is to start 360 security guards, click the “Functions” button on the toolbar, and then select the “360 bodyguards” button from “My Gadgets” (if not, click ““ Add a gadget to add. In the next 360 bodyguard window that pops up, select the "U disk bodyguard" button on the toolbar. In the lower right corner of the pop-up window, “U disk evaluator” appears, click on the “Start Authenticated” button (Figure 1). After that, a small window will pop up to display the current U disk model, and then click “Start to identify (Figure 2)”, the identification process begins, and after the identification is completed, the identification result window is displayed. It will show you the actual capacity of your U disk, close to the standard GB capacity, compared with the system identification capacity, and whether the identified U disk capacity is normal. This article comes from [System Home] www.xp85.com