Windows system boot blue screen problem solving method experience skills summary

mprexe file error is a serious error, virus attack, hardware failure, software error, etc. will cause. First use the latest version of anti-virus software to kill the virus, if non-toxic, please restart the computer and press F8 to select the security mode to enter the system to see if there is an error message in the "mprexe file error", then check the "device Whether the hardware in the manager " has duplicate, exclamation mark, red cross and other error messages, if any, delete it and re-enter the system, follow the prompts to install the hardware driver. Sometimes it's just because there are some bad hardware contacts, and this kind of error can occur. Just plug and unplug each accessory again. The reason and solution for the occurrence of "blue screen" on the computer often encounters the situation of blue screen during the use of the computer. For beginners, it seems to be a computer disaster, and I don't know what to do. In fact, as long as you understand the reasons, you don't have to be afraid. There are many reasons for the blue screen of the computer. The overall can be summarized as follows:

First, the screen display system is busy, please press any key to continue … …

1, virtual memory is insufficient Causes system multitasking operation errors.

Virtual memory is a unique method for solving system resources in WINDOWS system. It generally requires that the remaining space of the hard disk in the main boot area is 2-3 times of its physical memory. In order to make full use of the space, some enthusiasts stuffed their hard drives into full, and remembered the demanding requirements of WINDOWS. As a result, the virtual memory has an operation error due to insufficient hard disk space, so a blue screen appears. To solve this problem is very simple, try not to fill the hard disk full, often delete some temporary files generated by the system, exchange files, and thus free up space. Or you can manually configure the virtual memory, select Advanced, and transfer the default address of the virtual memory to another logical disk. This will avoid the blue screen caused by insufficient virtual memory.

2, CPU overclocking leads to operational errors

Overclocking is a common occurrence for enthusiasts, so various faults caused by overclocking are inevitable. Overclocking, on its own, is to achieve higher performance on the basis of the original, but due to the overload calculation, the internal operation is too much, causing the CPU to overheat, resulting in system operation errors. Some CPUs have better overclocking performance. For example, Intel's Celeron processor and AMD-K6-2 processor are better, but sometimes there are some inexplicable errors. (Example: I have tried the INTEL Celeron 300A. When overclocking to 450, the floppy drive reads the disk when it does not accept the command). INTEL's less than 200 CPUs and AMD-K5's overclocking capabilities are not so good. It is recommended that high-end CPUs should be overclocked, so the heat dissipation work must be done well. It is best to install a large fan, plus some heat-dissipating materials such as silicone. As for some low-end CPUs, I suggest that you should not overclock, so that overclocking does not achieve the expected effect, but the blue screen often affects the normal speed of the computer.

Second, the incompatibility or damage of the storage strips causes operational errors

The most intuitive phenomenon at this time, because this phenomenon can often be seen at the time of booting, it can not be started at all. Computer, the screen prompts that there is a problem with the memory, ask if you want to continue. This type of error is caused by physical damage to the memory or incompatibility of the memory with other hardware. At this time, only another memory has been changed.

Third, by unknown programs or virus attacks to

This phenomenon is as long as we usually encounter when surfing the Internet, when we are surfing, especially into some When the BBS station is exposed, it may expose its own IP and is attacked by some hackers. It is best to install some defense software on your own computer. Then there is the login BBS to set security settings and hide your own IP.

Fourth, the optical drive is abnormally opened when reading the disk

This phenomenon is caused by the blue screen when the optical drive is reading data. This problem does not affect the normal operation of the system, just click on the disc or press the ESC button.