How to make the computer faster after reinstalling Windows system?

How can I make the computer faster after reinstalling the system? What should I pay attention to? Let's take a look at the experience of netizens. First, the reasonable use of the hard disk
What is the reasonable use of the hard disk? First we need to understand the physical structure of the hard disk. A partitioned and formatted hard disk is based on a sector, and a partition is composed of a number of sectors. So what is a sector? We all know that the disk is rotating while it is working. The information it stores is recorded on its surface in a series of concentric circles. Each concentric circle is called a track. A sector has a size of 512 bytes, a whole ring is a track, and there are several sectors on a track, so it is easy to see that the larger the sector on the outer track, the larger the volume. The words are the lower the density, because the hard disk is mechanical transmission, so the speed of the search, read and write speed of the magnetic head is faster, the distribution of the partition is also from the outer ring to the inner ring, so the C disk is relative to the D disk. Outside, this is why we feel that the C drive is faster than the D, E and other partitions. Understand the above knowledge, we can use the hard drive reasonably! Take a new hard disk with a capacity of 60GB as an example: divide the C drive into 3 to 5GB (depending on the operating system), set the D drive to 1GB, set the E drive to 10GB, and save the watch. (It can be divided into F and G disks) - it has no effect on system speed. How to use after the good zone is the most important: 1. Install the operating system on the C drive and install the common small software such as MwIE, foxmail, ICQ, QQ, FlashGet, Super Rabbit, player software and some viewing software. On the C drive. If you use Microsoft's large software such as Office, you should also install it on the C drive. Of course, since we don't use all of the features, we have to customize the useful parts to save the C drive space! Then set the virtual memory to the D drive (just temporary ^_^) and then use the system's own disk defragmentation program to organize the C drive. 2. Use the system modification software such as "Wei Xiao Registry Optimization Master" to set the folder of "My Documents", "Internet Buffer", "Internet History", "Favorites", etc., which are often written and deleted. Go to the D drive to try to avoid disk fragmentation on other partitions and reduce hard drive performance! 3. Install various application software to the E disk. As for the game, it can be installed on the F disk. The G disk is used to store audio and video files. 4. Perform another defragmentation on the C drive, and then set the virtual memory to the C drive after completing the second big step below! Second, virtual memory settings
Setting virtual memory to a fixed value is a common "truth", and it is quite correct, but most people set it outside the C drive. It is not on the partition where the system is located, and its value is 2 to 3 times that of physical memory. Most people think that the larger the value, the better the performance of the system and the faster it runs! But this is not the case, because the system relies on virtual memory. If the virtual memory is large, the system will start to use virtual memory when there is still a lot of free space in the physical memory. Those that are not used are still stuck in the virtual memory. In physical memory, this will inevitably lead to a decline in memory performance! So the author started from 32MB memory to 512MB memory, and found that the above fact is very correct, the virtual memory should be set to physical memory 0 to 1.5 times (how much is 0? Is it disabled! ^_^) As well, the larger the physical memory, the smaller the multiple should be. When the physical memory is equal to or greater than 512MB, most PCs can disable virtual memory, and the memory performance is the highest! ^_^ As for how much your virtual memory needs to be set, you have to try it yourself, because this is directly related to the number and size of the resident memory software and the software you usually run, so I can't give Suggested value. You can set it to be the same as the physical memory before running several large software. If there is no abnormality, you can set it to half of the physical memory before running the large software. If an exception occurs. You must increase the value of virtual memory properly! By analogy, when you find the best value, just set this value to the C drive and it will be OK! Note: If you are using WindowsME and below, you can download "MagnaRAM97" to optimize physical memory and virtual memory, which is better! In addition, I recommend that you do not use the so-called software to optimize and organize memory!

; Third, reasonable placement of "shortcuts"
In most cases, we run software is usually the "shortcut" of the software to do The hard disk is getting bigger and bigger, and more and more software is installed. Many friends like to put shortcuts on the desktop, which not only dazzles you, but also reduces system performance, and will cause system resources to be used. Large and make the system unstable, so we better control the shortcuts on the desktop to about 10, other shortcuts can be placed in the start menu and shortcut bar, and all the software "uninstall" is fast Mode removal to improve system performance. Also, try not to have duplicate shortcuts. Fourth, use "safety" software with caution
The security software mentioned here refers to real-time anti-virus software and firewall. This kind of software is very large for system resources and CPU resources (somes are more than 30%). If you don't often go to the website, this kind of software is completely unnecessary! This is much more practical and convenient than overclocking the CPU! :) V. Reducing unnecessary random startup procedures
This is a common problem, but many friends don't know what programs can be banned, and what can't be banned, so many people don't do this. One step at a time. It is much simpler to have the optimization master. In the "boot speed optimization" of the interface, the optimization master will prompt you what can be banned and what can't be banned! In addition to speeding up the startup speed, the benefits of this can also improve the stability of the system in operation! Six, reasonable settings "icon cache"
Usually the system default icon cache is relatively large, which is obviously a waste of feeling, so we have to make the appropriate adjustment of its value, we can use "Windows optimization master "Look at how many icon caches the system has used, and then we will set its value to about 2 times the actual size. Note: Some computers may not be able to be modified using the Optimizer, in which case you can use the "Super Rabbit Magic Settings" to modify! In addition, the desktop background should not be too complicated (recommended to be "no"), and some friends have also made an animated desktop. This practice has no practical significance, except that it will bring instability to the system. Good role - after all, we only have a small amount of time to face the desktop!

Seven, a reasonable set of "disk cache"
system defaults are usually very conservative, so we need to be modified, we can optimize the master in "Windows "Modify it, but we have to manually enter the number, the minimum disk cache can be set to 2048 (KB), the maximum value is set to 25% of physical memory, and the buffer read and write unit is 512. Note: This practice will bring great benefits to the stable operation of multimedia software, especially the minimum setting is not too low! Eight, try to streamline the right-click menu
Many programs will leave a shadow in the right-click menu after installation, many of which are not used by us, but it brings a burden to our system. To do this, we can streamline the right-click menu in software such as "Super Rabbit Magic Settings", usually just keep the usual ones! In addition, you'd better delete the useless items instead of just removing the small tick in front of them! This can effectively reduce the loss of response caused by the "new" menu! Nine, the appropriate display refresh rate and resolution
Some friends always complain that their graphics card is too bad, some graphics cards are indeed poor, but in many cases because the display refresh rate is set too high The "illusion" caused by it. Usually 15, 15 inches of color display will set the refresh rate to 75Hz or more (if the bandwidth is enough, of course, it can be higher), there is no need to force too high. The resolution is also the same. It is usually set to 800×600 or 1024×768. As long as it is enough, there is absolutely no need to play “ultimate” and “ash”. In this way, the speedup effect of the hyperband is much larger than that of the graphics card! Conclusion
In summary, when you use the method of this article, you will find that the system is much faster than before! And it is much more stable.