Win7 overlay network speed

In the WIN7 environment (because you are using WIN7 system, other systems are unknown), if you have the following conditions, you may wish to try dual network overlay, double the network speed! ! ! My Internet conditions: 1, the company's 1 telecommunications 4M broadband + cat + company to run a company router 1, 2 own telecommunications 4M broadband + cat + own router 1 + their own 5 port switch 1 or more is The company uses the network broadband and my own network broadband conditions. The following is the use of switches and company routing + own routing to achieve network speed download overlay 4M ADSL reaches 800Kb /s Step 1 1, first enter the two router settings interface, set up the company The IP address of the routing LAN port is 192.168.1.2, and the IP address of the routing LAN port of the router is 192.168.1.1 (it is preferred to fill in the router IP in the local connection property). 2, set the static address of the computer used by the company, the company and my router will assign my computer to the same IP address (save reboot to take effect), my 192.168.1.103 connection to the Internet device (single route and cat connection is not Introduced, everyone should know) Three network cables, two network cables respectively connect two routers to the switch interface, and the other connects to their own computers and switches, and the hardware devices are connected. Step 2 Set the local connection properties. Set the router to be the preferred DSN service. Check the settings. Confirm the settings. After the completion, check the local property settings. OK. The following is the actual download speed of the download test, which is 900KB/S, and the normal single line is 4M. ADSL download speed is 400-500KB/S, you're done! ! If you have a two-line network, don't let him waste it. You can enjoy the 2 lines of network download speed with the above simple method, and it is officially cool! ! (Not a new method, I saw it on the Internet, but the steps on the Internet are not detailed enough, so I made it myself and shared it with everyone. I hope it works. For example, the two routers and switches are both TP-LINK, other routers may It should be the same setting)