U disk boot DOS settings and installation method

U disk to do boot disk is not very easy, first look at whether the motherboard supports, U disk support, U disk support, go to the next online U disk boot disk program, It can be used to make a boot disk very easily, and then enter the motherboard BIOS boot item. There are several items about the U disk boot item, you need to try one by one, mainly using the same mode with the U disk, such as Hdd or fdd mode, note that some compatibility between the motherboard and the U disk is easy to cause the startup is unsuccessful, you must try several times. Tell you a simple, universal way to make a "no drive" U disk method under Windows 98. 1. Format the USB flash drive as a boot disk (USB-ZIP type). There is an installation program on the U disk drive CD. After the installation, you can find the U disk program item under the “Programs” group and use the formatting tool software to create it. 2. Copy the “Drive” folder on the USB flash drive to the USB flash drive. 3. Press the “Del” key to enter the BIOS when booting, select “Advanced BIOS Features” and press Enter. In the “First Boot Device”, use the page key to select “USB-ZIP”, in “Second Boot Device”. Use the page key to select “HDD-0” then press “F10” key to save, press Enter to confirm exit. If you don't have a "USB-ZIP" item in your computer's BIOS, you won't be able to boot your computer with a USB flash drive. 4. After inserting the USB flash drive into the USB port, start the computer, create a DRIVE directory in the C drive, and then copy the file in the DRIVE of the U disk (in this case, the A drive) to the DRIVE of the C drive. The command is: MD C:\\DRIVE COPY DRIVE\\ . C:\\DRIVE Of course, you can also create a batch of processing files on the U disk in advance, and write the above two commands. You only need to execute this batch file under DOS. It can be (the specific establishment process is omitted). 5. Unplug the U disk, restart the computer, open the “Resource Manager” on the desktop, open the “DRIVE” folder on the C drive, and double-click “Setup” to install the U disk drive. Insert the USB flash drive after loading the screen prompts. This method is simple, because it loads the U disk drive into the U disk in advance, so the installation CD is discarded. This method is suitable for all U disk and can be generally promoted to be required.