How to use ghost graphic tutorial, one-click GHOST backup graphic detailed explanation (a)

how to use ghost graphic tutorial, a key GHOST backup graphic detailed explanation

First, the preparation work system is installed, Make a timely backup of the system, in case of any eventuality, it will be completed in three to five minutes after recovery, and you will have a brand new complete system.

One-click GHOST V8.3 Build 060903 hard disk version free download

Download the software from the above address and install it, or download the dwarf DOS toolbox, and also have GHOST inside. Then start the system, select

as shown in the second item in the figure, select the sixth item in the next interface, it should be: start GHOST 8.3 for manual operation.

The following interface will appear

Select "Local" → Partition → To Image (see Figure 1), this step can not be mistaken The order of selection for counting from top to bottom is 1-2-2.

2. The screen displays the hard disk selection screen. Select the hard disk “1” where the partition is located. If you only have one hard disk, you can press Enter directly.

3, select the image file to make the partition (i.e., source partition), Pick partition "1" (i.e., partition C) using the arrow keys , press the Tab key to switch to the "OK" button, then press Enter.

4. Select the location where the image file is saved. Press the “Shift+Tab” button to switch back to the drop-down menu of the selected partition. Press the up and down keys to select the partition, for example “1” : 2" means the second partition of the first hard disk, that is, the "D" disk. After selecting the partition, press the Tab key to cut to the file selection area, use the up and down keys to select the folder, and then press the Tab key. , cut into the "Filename" text box and type the image file name, such as "xp" or "C_BAK.GHO", and then press the Enter key. Weapons: It is recommended that you build a Ghost folder in the partition before the backup, put the GHOST program and backup files together, start the GHOST program from the GHOST directory, so go directly back to the mirror backup GHOST directory, directly fill in Back up the file name and press Enter.

5, Next Norton Ghost will ask you if you need to compress the image file, you can only use the left and right button to select, "No" means no compression; "Fast" means Small-scale compression is performed but the backup work is performed faster; "High" uses a higher compression ratio but the backup speed is relatively slow. Generally, "High" is selected. Although the speed is slightly slower, the hard disk space occupied by the image file will be greatly reduced (it will not be much slower), and the recovery speed is very fast.

6, after all this preparatory work done, Ghost will ask whether you operate, of course, choose "yes", and press Enter to start Make an image file for you. The backup speed has a great relationship with the CPU frequency and content capacity, and generally can be completed within 10 minutes. When the progress bar goes to 100%, it means that the backup system is done. You can actually press the reset button of the chassis or ctrl+alt+del instead of exiting the ghost or dos system.

Through the above work, we have made a backup of the C drive. When the system has problems that cannot be solved, we can easily restore the system.

Three, system backup restore 1, restart choose to enter the DOS system, go to the backup disk, enter the backup directory, run the GHOST program, select Local→Partition→From Image (note this time is the “From Image” item) , restore to the system disk. The order of selection from the top to the bottom is 1-2-3, and RESET is restarted after completion.

2. Select the location where the image file is saved. Press the “Shift+Tab” button to switch back to the drop-down menu of the selected partition. Press the up and down keys to select the partition. For example, “1:2” means The second partition of the first hard disk, that is, the "D" disk, after selecting the partition, press the Tab key to cut to the file selection area, use the up and down keys to select the folder, use the Enter key to enter the corresponding folder and select the source. File, which is the *.gho ​​file, and press Enter. If you start the GHOST program from the GHOST directory, you can directly see the GHOST backup file in the directory. Move the cursor to select.

3, the meaning of the legend at this time is that the source file you selected is a mirror file of the main partition, do not bother, press Enter.

4. The meaning of the legend at this time is to let you choose the hard disk. If you only have one hard disk, you can ignore it and press back directly.

5, the meaning of the legend at this time is, to restore the image file to which partition, we only operate on the C drive, so choose Primary, which is the primary partition C The meaning of the disk.

6, after completion of all the options, ghost will ask you to confirm the operation, of course, we have to choose "yes", and press Enter. Waiting until the progress bar finishes 100%, the image is restored successfully. At this point, just press the option "restart compter" given by ghost to restart.

Four, write batch files, create automatic system backup and restore

For example, create a GHOST folder under the BK folder under E disk, store GHOST.EXE Program, e:\\bak\\ghost\\ghost.exe -clone,mode=pdump,src=1:1,dst=e:\\ghost\\bac.gho -fx -sure -rbOpen Notepad, copy the above line to save and exit , renamed BF.BAT.

e:\\bak\\ghost\\ghost -clone,mode=load,src=e:\\ghost\\bac.gho:1,dst=1:1 -sure -rbOpen Notepad and copy the above line Save and exit, renamed to HF.BAT. Put these two files under the GHOST directory. After entering DOS, you can start GHOST backup by hitting BF, and you can restore the system operation by playing HF. It is your own customized two-button GHOST.

Description: pdump means backup, src is source disk, 1:1 first hard disk first partition is C drive, dst is target disk, e:\\ghost\\bac.gho is storage path E The file name of the disk GHOST directory is BAC.GHO. You can modify the drive letter storage path and file name according to your own needs. -fx is directly returned to DOS after completion. Pload means recovery, -sure is if There is a direct overwrite of the file with the same name, and -rb restarts the system after the restore or copy is complete. In this way, the DOS file name can be automatically backed up and restored by entering the batch file name in the GHOST directory.