Computer windows system virtual memory is too low solution

        Find the computer on the desktop, right click, select [Properties] in the right-click menu, open the system properties panel. In the system properties panel, click [Advanced System Settings] in the navigation bar. In the dialog box that opens, switch to the advanced option, find the performance column, click the [Settings] button on the right to open the performance option, we still switch to Under the [Advanced] option, then see the virtual memory below, click Change. Generally, when you open the virtual memory setting dialog box, you will see that it is gray and cannot be set. Because the above automatic management is checked, uncheck the box here. You will see the following settings. First, assign it. The drive letter of the virtual memory, that is, which disk you want to store in the virtual, the preferred is the c drive, if the c drive is not enough, you can choose other drive letters; then set the size of the virtual memory, this technology is relatively high, set Too big will cause the system to run slowly. If the setting is too small, it will not be enough. Generally, refer to the following [Recommended] value. If you think it is a little small, you can be slightly larger than this value. For example, the recommended value is 1521. You can Set to 1600, etc. Finally restart the computer to make the settings effective www.dnzg.cn set the principle of virtual memory: too large virtual memory settings will slow down the xp system download system response: virtual memory is not the bigger the better, because the larger the virtual memory, the memory read The slower the speed, the slower the system. Some people recommend setting the size of virtual memory to 0.5--3 times the physical memory. I suggest that you should not exceed 1x. Virtual memory is the best in the c drive: virtual memory on the c drive is the fastest, but some people's C drive is too small, a system is almost full, this time can only be placed Other discs. Virtual memory is a damage to the hard disk: virtual memory can not read faster than physical memory, and often read data quickly can also cause damage to the hard disk. Therefore, we recommend that you set the virtual memory to be enough for the standard, enough to use, do not set too large.