How to solve the CPU Fan Error error when the computer is turned on?

  

When we turn on the computer, we will inevitably encounter some problems. Recently, many users have encountered some problems when they boot up. Every time they turn on the computer, they will get an error message of “CPU Fan Error”. It is how it happened? In fact, this is caused by the CPU, so how to solve this problem? The following small series introduces you to the solution to the CPU Fan Error error when the computer is turned on.

CPU Fan Error if the BIOS errors caused, to restore the default, if not, open the box, pull the battery directly on the motherboard up, wait a half a minute back, so The motherboard will automatically resume initialization because there is no power.

The system BIOS does not detect the CPU fan speed is one of the most common reasons. For this situation, you can enter the BIOS to view: press the DEL button to enter the BIOS option, then enter Power→ Hardware monitor, we will See three options CPU FAN SPEED; CHASSIS FANSPEED; POWER FAN SPEED, change the CPU FAN SPEED item to IGNORED, change the CHASSIS FANSPEED item to N/A, and change the POWER FAN SPEED item to IGNORED.

CPU fan does not work normally. The speed is too low, which will cause CPU Fan Error error. This is due to the fan quality is not high, or the use time is too long, the fan speed is slow, the dust is too much, etc. Slowly caused, personally suggest that you can solve by directly changing the CPU fan.

The CPU fan power cable plugging error also causes CPU Fan Error, but this is even more uncommon, usually when the host is disconnected or the hardware is replaced. The CPU should be plugged in next to the "CPU Fan" interface. If it is not plugged in here, although the CPU fan can normally dissipate heat and normal use, the motherboard will often prompt the CPU to prompt the CPU Fan Error error warning when booting.

The above is the solution to the CPU Fan Error error displayed by Xiaobian for everyone. If you encounter the above situation, you can follow the above steps. After the operation is completed, the error code will no longer appear.

Copyright © Windows knowledge All Rights Reserved