Every time you turn on the phone, you must press F1 to enter the system.

Recently, many users have reflected that the computer must press F1 to enter the system every time it is turned on. What is going on? The main reason for this situation is caused by incorrect BIOS settings. Press F1 to load the BIOS default settings. The following is a small series for everyone to press F1 to enter the system every time you boot.

Operation steps:

1. First press the Delete key on the prompt interface to enter the BIOS setup.

2, find the load Optlmized Defaults option in the BIOS settings, select and press enter, it is to load the BIOS default settings.

3, in the selection confirming box & ldquo; OK & rdquo; Press Enter to save the settings and restart.

4, after the restart should be able to enter the system normally, but this does not guarantee that the problem has been solved, first power off the computer, then open the computer in a few minutes, if you can directly enter the desktop to explain the problem Resolved, if you still want to press F1, it means that the CMOS battery on the motherboard is dead.

5, CMOS battery is used to save the computer's BIOS settings and computer time in the case of power failure, if the CMOS battery is dead, these settings will be lost when shutting down, so every time There is a setting error.

6, to solve this problem is very simple, just go to the store to buy a new battery and replace it yourself, the battery model is CR2032.

7, the shutter open side of the chassis, on the motherboard can see a general CMOS battery, the battery is very conspicuous, If not, it is generally to be blocked by the graphics card, the graphics demolition Then change the battery afterwards.

These are the small series to introduce each boot must press F1 to enter the system solution. If you encounter this situation, you can follow the steps above.