Notebook to increase the memory bar operation method

As computer configurations continue to expand; computer memory is getting bigger and bigger. I believe that everyone knows that memory plays an important role in the computer, especially in the early days when the computer could not keep up with the memory. At this time, we can add memory to the computer to improve the system running space, so that it can be effective. Improve system speed and performance, the following small series for everyone to introduce the notebook to increase the memory stick operation guide.

steps:

1, we first need to have a general understanding of the performance of their computers, such as my computer was originally 4G of memory, 32-bit systems. My newly added memory is also 4G. If the memory of the computer is greater than or equal to 4G after the update, it is recommended to replace the 64-bit system, so that the memory can be used. So after the update, my memory became 8G, and the system was updated to 64-bit.

2, then we need to determine what kind of memory to buy. Here are a few points to note. First, we need to know if our original memory is DDR2, DDR3 or DDR4. The current mainstream should be DDR3 or DDR4. Then we need to know how much our memory is, like my one is 1600MHZ. of. The two indicators of memory must match, and it is impossible to have inexplicable problems. Another point is the original memory, how much memory is added as much as possible. These indicators can be detected by Master Lu. If you don't feel comfortable, open the back cover and look at the original memory model. Go online and search for the same model.

3, then buy the right laptop memory, we need to open the back cover, and remove the battery before turning on the power to pull. Generally, the back cover will have a small icon to indicate the location of the memory, but many of the computers have a cover at the back and the screws can be removed.

4, after opening the back cover we can see that memory, that is, the position shown in the figure. If you don't know what the memory looks like, you can refer to the first picture of this experience.

5, is to add memory such as drawing into inclined 45 degrees, and then entered, plug, plug tight, both sides of the snap automatically press down the fixed memory. There is no need to worry about plugging in here, because the memory has a foolproof design, but it can't be inserted. Also note that the memory must be tightly plugged in. I didn't plug it in at the beginning, and the computer didn't read it.

6, memory installed, install the battery and turn on the computer to try, if no problem, then can attach the rear cover and tighten the screw enjoy.

Above is Xiaobian to introduce notebook increase in the basic operation of the memory of the tutorial. Still do not know how to increase the user of the notebook memory, you may wish to try the above steps to try.