After the U disk boot disk is created, I can't read the BIOS of the motherboard.

I believe many users have encountered it. After the boot disk is created, the USB flash drive is inserted into the computer and the BIOS is found that the BIOS cannot be read. This prevents the installation from being completed. What is going on here? I believe many users still don't know. Below, Xiaobian introduces the solution to the situation that the BIOS can't read the U disk.

Operation steps:

First of all, you must determine whether your motherboard supports U disk boot, if the answer is yes, then you are not because you do not know the motherboard's quick start button and cause U disk Is the startup unsuccessful? If so, then the following tutorial you are optimistic!

1, restart the computer, press the shortcut key to enter the bios settings (do not know the computer shortcuts of the small partners can be queried above, you can refer to: "different bios to choose different entry methods")

2, after entering the bios interface, switch to the exit option, select Load Setup Defaults, press Enter to restore the bios default, as shown in the figure:

3, then switch to the boot option, press Enter to select the boot menu to enable , press F10 to save, as shown in the figure:

4, complete the above operation, you can see the restart and then go in through the U disk!

The above is Xiaobian for everyone to introduce the U disk boot disk and insert the computer to find the solution that bios can't read. If you encounter similar problems, follow the above steps. After the operation is completed, Insert the USB flash drive into the computer and find the BIOS to read the USB flash drive.