U disk installed system can not start, what is the problem?

Installing the system with a USB stick is one of the most common methods we use, bringing security and convenience. However, after the U disk boot disk creation tool is used, when the PE is installed and the system is restarted, the U disk is pulled out, and the operating system not found prompt appears. What do you mean by this tip? Let's solve this problem together. U disk boot disk creation tool without operating system not found download address http://www.udaxia.com/

so-called operating system not found ?

operating system not found Did not find a system available.

Cause Analysis:

There are two situations in which this is the case.

1. In the BIOS, the first boot is not set to the hard disk, but other drive letters, some BIOS will start the error, manually set the first boot to HDD.

2. After the system is installed, the primary partition is not activated and the system cannot be booted.

Steps to solve:

To activate the primary partition, it is actually very simple. Take PQ as an example. Select the partition to be activated, and then select the job (operation) → advanced (advanced) & rarr; set to work.

Note: Since the different versions of the text may be in parentheses, it may be before the parentheses! If you want to set the primary partition: Optional: Job ———Convert —— — Convert to the main!

If you use the U disk to install the system, you will encounter the "operating system not found" prompt, you need to check which is the cause, and then according to the above Steps to solve this problem. I hope the above article can help you.