Talking about the Causes and Solutions of the Broadband Connection Error "769"

Nowadays, in addition to the wireless network, the average person uses the computer to access the Internet with the most broadband connection, but I believe everyone has encountered it, the broadband connection is wrong. For example, the broadband connection error & nbspquo; 769 & rdquo; What is the reason? How to solve?

Open the computer, click on the broadband connection, the system prompts a small dialog box, showing the broadband connection error & ldquo; 769 & rdquo What does this mean? How to solve this problem? Please ask the professional staff to introduce to you in detail:

Broadband connection error 769

Error 769: Unable to connect to the specified target.

Question: This refers to a problem with your computer's network device

Solution:

Open “My Computer”→“Control Panel” →“Network Connection”, check if the local connection is in

“disable” status, if you just double click on the local connection, you can see that the status changes to “enabled” . If there is no local connection,

then your network card is 100% problematic —— not installed or broken. Please contact your computer supplier or solve it yourself.

Error 769 error occurred, most of the NIC is disabled, enabled! The cause is generally: user's misuse or some firewall software, computer viruses, is very common. If the local connection is not found, the driver of the network card is lost or the computer does not detect the network card. You can reinstall it.

Cause: The network card is disabled

Solution: Please click Right click on the computer, select Properties, then select Device Management, then look at the NIC driver status. If it is a “x”, the NIC is disabled, right click to activate the NIC.

Broadband Connection Error 769 Causes and Solutions

Broadband Connection Error 769 Cause

Normally, you will receive error 769 if one of the following conditions exists :

1. The network cable has been disconnected.

2. The modem is disabled.

3. The modem driver is corrupted.

4. Spyware is running on the computer, which prevents the connection.

5.Winsock needs to be fixed.

6. The third-party firewall software blocked the connection.

Solution:

To find out the cause of the problem, follow the steps below.

Step 1: Make sure the network cable is connected