How to set virtual memory, how to set virtual memory

(1) Reasonable setting of virtual memory

/Virtual memory setting is mainly set according to your physical memory size and computer usage, on the desktop Right click on "My Computer" and select "Properties" to see the memory. According to Microsoft's recommendation, virtual memory is set to 1.5--3 times the physical memory capacity, such as 512MB of memory, virtual memory is set to 768--1536MB; 1G of memory, virtual memory is set to 1536--3072MB. It also allows Windows to automatically allocate and manage virtual memory. It can dynamically adjust the virtual memory based on the actual memory usage. There is a recommended value below the virtual memory settings page. If you really don't know how much to set, it is recommended to use virtual memory. It is set as the recommended value. The virtual memory has two values ​​of initial size and maximum value. It is better to set the initial size and the maximum value to be the same to avoid the system frequently changing the size of the page file and affecting the running of the computer. If the memory capacity is 2GB or more, you can also turn off the virtual memory if you do not run large files or games.

/Virtual memory is to use part of the hard disk space as memory when your physical memory is not enough. However, since the hard disk transfer speed is much slower than the memory transfer speed, the use of virtual memory is more efficient than physical memory. slow. The actual actual needs of the individual should be adjusted as many times as possible. Setting too large will generate a lot of debris, which will seriously affect the speed of the system. If it is too small, it will not be enough, so the system will prompt you for virtual memory.

/(2) Virtual memory setting method

/Right-click "My Computer" and select "Properties - Advanced - Performance - Settings - Advanced - Virtual Memory - Change", select the disk where the virtual memory is located, and then click "Custom Size" below "And enter the "initial size" and "maximum value", and finally press the "set" button, and then you can determine. How to set virtual memory from C drive to other disks (if on other disks, set the same method): Right click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual Memory Change - Click C Disk - single "no paging file" - "set", the virtual memory next to the C disk disappears; then select D or F disk, single "custom size" --http://www. Pc6c.com, please keep the values ​​in the "Initial Size" and "Maximum" text boxes under this tag - "Settings" - OK - restart the computer and the settings are completed.

/Virtual memory is best not set in the same disk as the system. The memory changes dynamically with the use. The C disk is easy to generate disk fragmentation and affect the system running speed. Therefore, it is best to set the virtual memory to a disk with a large remaining space on the disk, such as D and F. This can prevent the system from frequently reading and writing operations on the C drive and affect the system speed. Virtual memory is on a single computer and can be set on only one disk at a time.

/(3) Reduce the memory burden:

/1, open the program can not be too much. If there are too many documents open at the same time or too many programs are running, there is not enough memory to run other programs, and you should close unused programs and windows.

/2, the program that runs automatically can't be too much. Click "Start" - "Run", type "Msconfig" - "OK", open the "System Configuration Utility" window, delete the startup project that does not want to be automatically loaded.

A: My Computer--Properties--Advanced--Performance Settings--Advanced--Change--Select Area C, enter 0 points at the initial size and maximum value to cancel the virtual memory of the C drive. , then point D (or other disk, premise that the space is the largest) disk, enter the actual size of the actual memory 1.5-2 times the initial size, enter the actual memory 3 times at the maximum value, then click the setting - determine the completion of the settings

This setting is the most reasonable, friends you may wish to try, but also improve the system performance and speed

A: "virtual memory" midpoint "change", the virtual memory value is set to physical memory 2.5 times, set the initial size and maximum value to the same, and set the virtual memory outside the system disk. For example, your memory is 256M, you can set it to 640, the operating system is installed on the C drive, and the memory is set on the D drive. There is a maximum and minimum

is generally 1.5---3 times the memory is generally 512MB or less is the original 512 or more is 1.5 times the memory, so it is recommended that you set the 3G is 1.5 to 2 of your computer's memory value The initial value is 1024

the maximum is 3072

the initial value is the largest 2-3.5 times as well