IBM PC server installation NT fault resolution example

When installing Windows NT 4.0 with three boot disks on IBM Netfinity and eServer xSeries servers, this problem is often encountered: after manually loading the SCSI or array card drivers, the installer reports that the installer could not be found by The hard disk partition specified by the MS-DOS installer. & rdquo; can not continue to install. In the groping, I found these two methods can solve this problem: Solution 1: On the second boot floppy disk of Windows NT, delete the winnt.sif file, and then restart with these three floppy disks, Windows NT 4.0 can be installed. . Solution 2: Re-create the three boot disks with the NT installation CD. 1. Format three 3“ floppy disks on an NT PC or server. 2. If your system is Windows NT or Windows 2000, after putting the NT installation CD into the CD-ROM drive, open “Start“—>”Run“, enter the install command in "Open” : M:\\i386\\winnt32 /ox” (M is the drive letter). If the system is Windows 98, Windows 95 or DOS, the command is changed to "M:\\i386\\winnt /ox"; (M is the CD-ROM drive letter), you can solve the above problem by using these three boot disks.