What does "error code 678" appear when broadband is connected? Why is this

best answer

1. When the dialing occurs, various error codes such as 691, 678, etc., how to deal with it? ◆ Error 602Theportisalreadyopen problem: Dial-up network due to device installation error or in use, can not run the connection reason: RasPPPoE does not have complete and correct installation processing: uninstall any clean PPPoE software, reinstall ◆ error 605Cannotsetportinformation problem: Dial-up network due to device installation error Cannot be set to use port reason: RasPPPoE does not have complete and correct installation processing: Uninstall clean any PPPoE software, reinstall ◆ Error 606Theportisnotconnected problem: Dial-up network can not connect the required device port Cause: RasPPPoE is not completely and correctly installed, connected Line fault, ADSLMODEM fault handling: Unloading clean any PPPoE software, reinstalling, introspecting network cable and ADSLMODEM ◆ Error 608Thedevicedoesnotexist problem: Dial-up network connection device does not exist reason: RasPPPoE does not have complete and correct installation processing: uninstall any clean PPPoE software, Reinstall ◆ Error 609Thedevicetypedoesnotexist problem: The type of device connected to the dial-up network can not determine the reason: RasPPPoE is not finished Full and correct installation process: Uninstall clean any PPPoE software, reinstall ◆ Error 611Therouteisnottvailable/612Therouteisnotallocated problem: Dial-up network connection route is incorrect Cause: RasPPPoE is not completely and correctly installed, ISP server fault handling: Uninstall clean any PPPoE software, Reinstall, call ISP interrogation ◆ Error 617Theportordeviceisalreadydisconnecting problem: Dial-up network connection device has been disconnected reason: RasPPPoE is not completely and correctly installed, ISP server fault, wiring, ADSLMODEM fault handling: Uninstall clean any PPPoE software, re-install, Call ISP to inquire, reflect on the network cable and ADSLMODEM ◆ Error 619: Unable to connect to the specified server, the port used for this connection is closed. Problem: Due to the last connection error and the redial distance is too short, the server will not respond to your username and password. Solution: It is recommended that you try again after one to two minutes. Error 621Cannotopenthephonebookfile error 622Cannotloadthephonebookfile error 623Cannotfindthephonebookentry error 624Cannotwritethephonebookfile error 625Invalidinformationfoundinthephonebook Problem: Windows NT or Windows2000 Server network RAS network component problem, did not find dialing connection reason: uninstall all PPPoE software, reinstall RAS network Component and RasPPPoE ◆ Error code 630, suggesting that there is no suitable network card or driver error reason: hardware error, can be caused by network card damage or network card driver failure, or may not install network card processing method: Introspection of network card can task, network line can be inserted , reinstall the NIC driver and make sure the NIC is working properly. ◆ Error 633 Problem: Dial-up network network cannot be run due to incorrect installation or use of the device: RasPPPoE is not completely and correctly installed: Uninstall any PPPoE software, reinstall ◆ Error 638 Problem: After a long time, can't The reason for connecting to the ISP's ADSL access server: ISP server problem; in the bad connection created by RasPPPoE, you entered a phone number incorrectly: Run Raspppoe.exe to create dial-up, can you list the ISP service? To determine that the ISP is normal; to use the dial-up in the call...Remaining full text>>
liuyq000 2008-5-18

< Br>