Windows 2000 how to install? Win2000 operating system installation full diagram

This article introduces the whole process of the win2000 operating system installation, the content is more detailed, very practical, interested friends can learn!

Windows operating system diagram - WIN2000

windows2000 server articles: First, preparation: 1. Prepare the Windows 2000 server Simplified Chinese version of the installation CD, and check whether the CD-ROM supports self-starting. 2. If possible, use the ScanDisk to scan all hard disks before running the installer to check for hard disk errors and fix them. Otherwise, it will be troublesome if the hard disk error is detected during the installation. 3. Record the product key (installation serial number) of the installation file with paper. 4. If possible, use the driver backup tool (such as the driver wizard) to back up all the drivers under the original Windows 2000 to the hard disk (such as: Frive). It is best to write down the motherboard and network card, graphics card and other major hardware models and manufacturers, pre-download the driver for backup. 5. If you want to format the C drive or D drive during the installation process (it is recommended to format the C drive during the installation process), please backup the useful data of the C drive or D drive. Second, start the system with the CD: (If you already know the method, please go to the next step), put the 2000 installation CD into the CD-ROM drive, restart the system and set the CD-ROM drive as the first boot disk, save the settings and restart, if there is no accident Can be seen to the installation interface: Third, install the Windows 2000 server CD since the start, if there is no accident, you can see the installation interface, will appear as shown below. There are three options in this step. 1. To start installing Windows 2000, press ENTER; 2. To fix the installation of Windows 2000 Chinese version, press R3. To stop installing Windows 2000 and exit the installer, press F3” here we select the first item by pressing the “Enter” key and the following figure appears. License Agreement, there is no room for choice, press “F8”. Here use the "down or up" arrow keys to select the partition used to install the system, select the partition and press the "Enter" key to enter, the installer will check the selected partition, if the partition has already installed another system The following picture will appear. To install using the selected partition, press the “C” key. Here you can format the selected partition to convert the file system format, or save the existing file system. There are many options, but note that the NTFS format saves disk space, improves security and reduces disk fragmentation. At the same time there are many problems. OS and 98/Me can not see the NTFS format partition (here is Server, personally strongly recommend NTFS), here select "Use FAT file system to format the disk partition", press “ Enter&rdquo ;key. Format the warning of the selected partition C drive, press F to prepare to format the c drive. Since the space of the selected partition C is larger than 2048M (ie 2G), the FAT file system does not support disk partitions larger than 2048M, so the installer will format the C drive in the FAT32 file system format, press the “Enter” key to enter. Only use the CD to boot or install the boot floppy disk to start the Windows 2000 installer, in order to provide the format partition option during the installation process; if you use the MS-DOS boot disk to boot into DOS, run i386winnt to install Windows 2000, when installing Windows 2000 Format partition options. After formatting the C partition, the installer begins copying files from the disc. After copying the file, the system will automatically restart after 15 seconds after copying the file. At this time, please pay attention to it. Please set the hard disk as the first boot disk or temporarily remove the installation CD after the system restarts. Keep the system from entering an infinite loop and restart the installer. After restarting, the 2000 splash screen appears for the first time. After starting, the device will be tested and installed, and the black screen will be twice. This is normal. When it is finished, it will appear as shown below. The default values ​​for the regional and language settings are OK, just click the “Next” button. Enter any name and unit you want, and click the “Next” button. If you don't pre-record the product key (installation serial number), it's a big deal! Enter the installation serial number here: H6TWQ-TQQM8-HXJYG-D69F7-R84VM, click the “Next” button. Here you can choose one according to your needs, you want to configure the server to choose the first item, configure it as the second item of the workstation (same as Windows 2003), and then press “Next”. Enter the default as the server name and enter the system administrator password twice. Please remember this password and use it when logging in. The component options appear, you can choose according to your needs, or you can change them in Add/Remove after the installation is complete. Click “Next” to continue. Don't talk about the date and time settings, click “Next” and then start installing the network. Network settings select “typical” can, point & ldquo; next & rdquo;. Click “Next” to start installing components, saving settings, and deleting used temporary files. Click the “Complete" button to complete the installation process and the system will restart. Press Ctrl+Alt+Delete to start the system. Enter the password you set when you installed it. If you don't want to configure your server, you can configure it later, just click “Next” and the desktop will appear. Will "show this screen at startup", the previous check is canceled, the window will not appear the next time you start, directly close the window Windows sever 2000 started successfully. Fourth, after the basic setup is completed, the post-production work is much longer than the installation time; 1. After the installation is completed, it is necessary to check whether the device driver has been completely installed; 2. Set the Internet connection, update the system online; 3. Install the software. ; 4. Optimize and back up the system with Ghost.

Win2000 operating system installation has been completed, the process is a bit more, but not very complicated, as long as everyone follows the steps step by step, I believe that they will install the win2000 operating system! Thank you for watching!