Ready to make the system VPN connection smooth and smooth

In order to enable employees to access the resources in the intranet safely and efficiently, it is believed that many organizations have built VPN servers in the internal network. When employees go out to work, they can use virtual encryption tunnels at any location on the Internet to directly access them. Any shared resource on the same subnet as the VPN server has the same effect as accessing shared resources in the local area network; and this type of network access has higher security connection performance and network connection cost than the previous dial-up access method. more economics. However, in the process of actually using the VPN connection to access intranet resources, we often encounter failures in which the VPN connection is unsuccessful. In the face of such a failure phenomenon, many people tend to behave in a hurry, not knowing where to go from. Let's deal with it? In fact, there are many reasons why the VPN connection is unsuccessful. As long as we have the equipment, we will be able to make the VPN connection smooth and smooth!

Starting from the server

In order for ordinary employees to successfully access the shared content in the VPN server and its subnet through the VPN network connection, we must properly set the parameters of the VPN server. If the parameters are not properly set, then the VPN network connection. Naturally, you can't go smoothly.

1. Whether remote access is supported

If the VPN server does not support remote access, the VPN client cannot access the VPN server and its subnet no matter how the connection is made. Share content. When checking whether the VPN server supports remote access rights, we can follow the steps below:

First, in the host system where the VPN server is located, click Start /Programs /Administrative Tools. "/"Route and Remote Access" option, at the left side of the pop-up routing and remote access console window, right-click the host name corresponding to the VPN server, and execute the "Properties" command from the pop-up shortcut menu to open Corresponding to the host's property setting window;

Next, click the "General" tab in the settings window to open the tab settings page shown in Figure 1, and check the "Remote Access Server" "Whether the option is selected, once it is found that it is not selected, it means that the VPN server does not support remote access permissions. In this case, we must re-select it in time, and then click the "OK" button to save the above settings. So, the VPN server can support ordinary users to connect to the VPN network.
Previous 12 3 4 5 6 Next Read more