Windows 2000 boot CD production

Windows 2000 The original boot CD production has two methods, the boot function is the same. The first

: cdrwin is done, it can be made exactly the same original and no more than a file (refer to visible under the WINDOWS), but it is not added to the other boot, not Do multiple booting, please see CDRWIN to make WINDOWS2000 boot CD.

second: is a multi-boot, but gets sector file in the CD point of view. This article describes



second manufacturing method for instructions:

1, herein said start function Windows2000, Windows2000 disc is genuine as above, press any key to boot Boot from the CD-ROM; boot from the hard drive after 5 seconds without pressing any keys.
2, the content of this article comes from Bart Lagerweij's "example4", because the original text is in English, it is not convenient to read. Hereby, the simplified steps have been slightly modified and written to make it easier for everyone to use.
3, the CD is made, do not need to prepare any other burning software, with burning software in example4.

guide features:

1, press any key to boot from the CD-ROM mounted into the installation of the guide Windows2000.

System Requirements:

1, can be produced in all WINDOWS system, preferably fabricated under WINDOWS 98.
2, to ensure that the C drive has more than 1.3G of free space, used to store the files and ISO files to be burned.

If there is remaining space in other partitions need to modify its own path to the relevant file.

software ready:

example5

Production process: After

1, unzip the downloaded example5.zip placed in the root directory of C (c : example5), example5 file structure as follows:

c: example5autorun.bat
c: example5cdrecord.exe
c: example5cygwin1.dll
c: example5del_fast.bat
c: Example5del_full.bat
c:example5Disk2img.exe
c:example5findcode.bat c:example5make.exe
c:example5makefile (this is a file)
c:example5mkbootcd.exe
c :example5mkbootcd.txt
c:example5mkisofs.exe
c:example5sh.exe
c:example5disk1 (will become the root directory of the burning disc)
c:example5disk1Bootcat.bin
c:example5disk1Bootfont. Bin
c:example5disk1Cdrom_ip.5 (This is the professional version of the file, the server version uses Cdrom_is., the advanced server version uses Cdrom_ia.5
c:example5disk1Cdrom_nt.5
c:example5disk1w2ksect.dat

2, WINDOWS 2000 Professional to be burned (Cdrom_is.5 for server version, Cdrom_ia.5 for advanced server version) and The file to be burned is placed in the disk1 directory (c: the example5disk1 directory will become the root directory of the CD). After the file is placed, the following files should be added to the disk1 directory:

c:example5disk1i386 (Windows 2000 installation directory) , i386 is placed in the root directory)

...
3. Double-click findcode.bat, and a message similar to the following will appear.

Write down the bus code of your recorder. as is my recorder SONY CRX120E, its code bus 1,1,0

4, with Notepad Makefile, find the following two lines

cdrdevice: = 0,1 ,0
isofile :=c:/mycd.iso

Change the 0,1,0 of the first line to its own recorder bus code, if I am 1,1,0

Change the d:/mycd.iso of the second line to the path where you want to store the iso file. If you want to put it in another location, please modify it yourself.

5, put a blank disc burner.

If you are using CDRW, need to format, double-click del_fast.bat, quick format. Or Double-click del_full.bat for full formatting.

6, double-click autorun.bat, the computer will automatically dials.

7, after the completion of dials, use this CD to boot try. wish you success!