Windows Vista operating system often encounters faults

After a new thing emerges, there will definitely be a lot of problems, and the official release of the Windows Vista operating system, because of its high-end hardware requirements, the system itself, the reason for the software support, so Caused us to encounter some troubles in the process of using, today we will tell you about the common failure of the Windows Vista operating system, the front celestial network operating system column has already told you some relevant aspects, as A series, let's continue to tell you about this. Windows7 failure

First, Win Vista disk drive fault sound card repair

Drive letter confusion is the old problem of the Windows operating system. Microsoft's Windows installation CD has always been in its own program to confirm the drive letter of the hard disk partition, but this time Vista is more aggressive. When booting from the CD, the drive letter of the partition to which it is installed is forcibly changed to C. The following other drive letters are also arranged according to the previous Microsoft Windows installation conventions. Camera failure

The Vista drive is in a mess, so I have to adjust it and install it again. The method is to restore the wrong drive letter to the previous look in Vista. For example, in the previous case, it should be restored to: C: -> Z: -> F: , D: -> C: , Then restart Vista, of course, when the drive is restored, it will prompt a lot of errors, and neither Explorer nor Computer can browse. At this time, you can only use the "Win+R” shortcut to start the “Run” box to confirm that the drive letter has been restored to the original normal state.

Then type the Setup.exe under your Vista installation CD (or the virtual CD-ROM of Vista installation ISO) directly in the existing Run box of Vista. For example, your CD-ROM drive letter is X:, Put the installation CD and enter X:\\Setup.exe in the Run to run the Vista installation. This way, when the drive is upgraded or the new custom installation is performed directly, the drive letter is normal, and the installation program in the installation CD will not recognize and arbitrarily make claims.

Of course, if some hardware is not standard and incompatible, it may not be upgraded. Then the new installation, the old Vista will be automatically backed up to a Windows.old directory by the installer. Just you must install it under this existing Vista, otherwise you will start the installation from the CD-ROM drive, the drive letter will still be confused. Because the drive letter in your existing Vista has been adjusted, the installer will refer to the original correct drive letter when doing an upgrade or a new installation under it. However, it is annoying enough. Even if the installation is done twice, the drive letter is correct, but the identification of the partition letter on the installation CD is still a big problem.

For example, if your system is broken, you need to use Vista's installation CD to repair it. Vista installation CD will still be very good at discriminating the drive letter when you perform System Recovery, just start with CD-ROM installation. When the drive letter is confused, it is a truth.

Second, Vista and XP boot prompt menu failure

Because Windows Vista operating system is not mature in some aspects, so many users now use Windows XP and Windows Vista Dual system, but the problem often encountered with dual systems is the startup menu failure. What should I do if I encounter this problem? In fact, it is a good solution. See the method we provide to you below, and it will definitely help you solve this problem.

The solution is as follows:

1. Load the Vista CD image using Daemon Tools.

2. Open “Run> (Start > Run) and type cmd.

3. Enter X: (X stands for your virtual drive letter).

4, enter cd boot

5, enter bootsect /nt60 SYS (if you want to delete is bootsect /nt52 SYS).

6. After restarting, the Windows Vista boot manager has been restored.

Third, Vista can not eject USB mobile storage device

In fact, whether it is Windows Vista system or other windows system, there will be a situation where USB mobile storage settings cannot be ejected. The reason for this failure is mainly due to the fact that the USB removable storage device has files being accessed by other programs. Some applications will still exist in the system process after being shut down. It may still be impossible to safely delete the hardware. In this case, you need to re-logout the system and then click to safely delete the hardware.