My T61 installation vista use experience

A friend had to install the system a few days ago, bought a fool version of the XP system installation disk (double-click the option to install it directly), and found that many things in the system do not like, many things are relatively old, also need to uninstall And reinstalling a lot of software, the most important thing is that the system is not clean, there are a lot of junk plugins or even viruses, and there is a friend who just started a hard drive, the hard drive is SATA, the system is installed by ordinary methods, and the result is no effect. This hard drive is gone. Recently, because I need to relax, I didn't arrange anything, I accidentally started the forum every day, so I wrote some things about my own system, and I also studied with friends who like Xiaohe. Everyone knows that it is not difficult to install an operating system for a computer. It is not difficult to install XP. It is not difficult to install VISTA, but because the hard disk of X61/T61 is SATA, it is a bit difficult... I used to install it myself, but it used to be It is according to other people's tips to paint the tiger's security. Many things only know the situation, I don't know the deeper principles. Later, I really didn't like all kinds of GOHST and IBM's R&R, I started to study the installation method. After the system is not good, I will directly It’s packed. I found that there were a lot of problems with my previous installation. For those who have not installed the system for the IBM X60\\T60 and above models, maybe they are very skilled at installing WINDOWS, but they still need to study it. I have seen the forums and various tutorials and the experience of the so-called prawn (it is hard to find about IBM), thank them for sharing, but there are still some shortcomings, many details have not been noticed, so I touched A lot of walls, a misty, combined with a little bit of experience, discuss the installation steps and possible problems. Start below.. To install, you must first have an xp or vista installation CD, or other forms (hard disk, USB flash drive), if not, go download it. There is a small place to pay attention to when engraving the system disk with NERO. It is wasted when it is wrong. After the completion of the disk we started to install.. 1, bios settings. My T61 is booting, press f1 to enter bios, enter configuration, and then set the SATA mode to compatibility (compatible mode) in SATA. The default is AHCI mode (advanced master interface). This step is very important, otherwise XP operation is installed. The system will be blue screen, the reason is because the XP system installation disk generally does not have a SATA driver. Then press f10, press Enter to exit bios. I didn't have the heart to try VISTA. I don't know if it will be blue screen, but I know that VISTA is definitely correct. It is said that it is wrong. As for how Linux has not been studied, continue to set BOIS, set the boot to CD boot. (Now the T400 should be the same??) 2, the installation process is equivalent to the normal installation process, not much to say, step by step installation until the end, the time should not be too long, generally, finally The system interface appears. 3. After installing the system, the installation of the driver starts to be a bit problematic (I think the most important and useful for many people is this step). The first installation should be the SATA hard drive, otherwise you can only run in compatibility mode, it is a pity that the transmission speed of sata, white spent SATA money, I will be nonsense. Go to the official website, find the serial hard drive Matrix Storage.exe file, double-click, extract to the C:\\drivers\\win\\imsm directory, and then run the install.cmd file in c:\\drivers\\win\\imsm\\prepare. After the completion, restart, you can change the sata mode back to ahci in bios. After entering the system, you will be prompted to find the ide controller. When installing the driver, point to c:\\drivers\\win\\imsm\\, my T61 is installed. VISTA did not prompt to install the driver pointing, he installed it after rebooting, I am very depressed, but I believe there should be no problem, T60 installed XP prompt, T61 installed VISTA hardware software has improved, because it is the default. If you are not at ease, you can also enter the system and right click on the PCI DEVICE under the IDE ATA controller in the device manager to select the update driver, select the specified location to install, and assign it to the C:\\DRIVERS\\WIN\\IMSM directory to search for the installation. can. My machine did not have a PCI DEVICE at the time. However, the intel(R)ICH8M-E/M SATA AHCI Controller appeared in the IDE ATA in the final device manager. Explain that everything is correct. Installing other drivers is relatively simple. First press the motherboard and double-click the downloaded driver. The driver will be extracted to the hard disk. Click the right-click property of My Computer and select Hardware to select Device Manager. Expand System Devices Options Double-click Atmel Tpm Pnp Device or Atmel TPM. Select the Driver tab, click Upgrade Drivers and Software... Point the driver update location to the following location: C:\\Drivers\\Win\\TPM. Click Next. Follow the on-screen instructions to install. After the installation is complete, restart the computer. Note: If an ATMEL device with an exclamation mark appears, right-click to delete it. Unfortunately, there was no TPM in my installation process... I solved it by other methods, I was not sure about the feasibility, so I didn't write it out. Management Engine Interface (Intel AMT 2.6) Motherboard Driver Click the driver file icon or link. When the file download dialog box pops up, select “Save” .Download the driver to the location you specified. Double-click the downloaded driver. File, the system will prompt you to select the target folder to be extracted; click the “Install” button, the file will be automatically extracted and executed; follow the on-screen instructions until the installation is complete. Unfortunately, I failed during my installation. Ignore it. Bluetooth Please turn on the Bluetooth device before installation. If prompted to find new hardware, click Cancel. And install according to the following methods: Double-click to run the downloaded driver file, the system will prompt you to select the target folder to be extracted; click the “Install” button, the file will be automatically extracted and executed; follow the on-screen instructions Yes, until the installation is complete. Smart Card Reader Double-click the downloaded driver and the driver will be extracted to the following location on the hard drive: C:\\DRIVERS\\WIN\\SCREADER. Click the right-click property of My Computer and select Hardware to select Device Manager. Expand Smart Card Readers Options Double-click USB Smart Card Reader (Windows driver) or Integrated Smart Card Reader (Lenovo driver). Select the Driver tab, click Upgrade Drivers and Software... Point the driver update location to: C:\\DRIVERS \\WIN\\SCREADER\\LENOVORD.INF. Click Next. Follow the on-screen instructions to install. After the installation is complete, restart the computer. Wireless Network Card Open the folder generated after decompression. Select IPRODIFX.EXE and click Open. Follow the on-screen instructions to install. After the installation is complete, restart the computer. Graphics card, modem, power management, message board, mouse, sound card, camera, Ethernet driver (Intel PRO/1000 network adapter software) installation method is simple and the same installation method: Double click Run the downloaded driver file, the system will prompt you to select the target folder to be extracted; click the “Install” button, the file will be automatically unzipped and executed; follow the on-screen instructions until the installation is complete. Finally, you can install some ibm-specific software according to your choice. For example, pcdoctor what ~~ Of course, I think the one that must be installed is system update. When the driver is in difficulty or has no direction, you can install this software. It will automatically detect the system and connect to the network to help you list and install it. And updated drivers. . When you're done, check to see if there is a question mark in your device manager. Normally it won't be there. If there is, it is very simple, open ibm system update, update it, the important all the more, the recommended choice, and then restart, certainly no longer. Other self-installed, kill soft (recommended nod32 EAV 4.0 (small but fine, suitable for general configuration books. 2.7 for lower configuration) or 麦麦企业版 (this kill soft is more complicated, you need to write your own rules, but Very fun, very powerful!! Fully explained the sentence, the poison is in defense, not in killing! Friends who can use this can contact me, have time to study together), Kabbah does not recommend anything, everyone Used, I realized it, decompression, office, QQ, 360, and so on. GOHST if you feel it is necessary, if you are proficient, reinstall it if you have any problems, and keep the driver. Keep the larger software in IBM's thinkvantage function. For example, your think system update updates the fingerprint recognition software (this software is relatively large). You can find it in the C drive, test it out, leave it, and then Just delete the inside, as for how to find where they are, study it yourself, and you can delete them and some attached files, save C disk space, how to delete, study it yourself. .