Windows Vista operating system often encounters fifteen failures

After a new thing emerges, there will definitely be a lot of problems, and the official release of the Windows Vista operating system, because of its high-end hardware requirements, the system itself, the reason for the software support, so Caused us to encounter some troubles in the process of using, today we will tell you about the common failure of the Windows Vista operating system, the front celestial network operating system column has already told you some relevant aspects, as A series, let's continue to tell you about this.

First, Win Vista disk drive error

Drive letter confusion is the old problem of the Windows operating system. Microsoft's Windows installation CD has always been in its own program to confirm the drive letter of the hard disk partition, but this time Vista is more aggressive. When booting from the CD, the drive letter of the partition to which it is installed is forcibly changed to C. The following other drive letters are also arranged according to the previous Microsoft Windows installation conventions.

The Vista drive is in a mess, so I have to adjust it and install it again. The method is to restore the wrong drive letter to the previous look in Vista. For example, in the previous case, it should be restored to: C: -> Z: -> F: , D: -> C: , Then restart Vista, of course, when the drive is restored, it will prompt a lot of errors, and neither Explorer nor Computer can browse. At this time, you can only use the "Win+R" shortcut to start the "Run" box to confirm that the drive letter has been restored to the original normal state.

Then just type Setup.exe in your Vista installation box (or Vista installation ISO virtual CD-ROM), for example, your CD-ROM drive letter is X:, Put the installation CD and enter X:\\Setup.exe in the Run to run the Vista installation. This way, when the drive is upgraded or the new custom installation is performed directly, the drive letter is normal, and the installation program in the installation CD will not recognize and arbitrarily make claims.

Of course, if some hardware is not standard and incompatible, it may not be upgraded. Then the new installation, the old Vista will be automatically backed up to a Windows.old directory by the installer. Just you must install it under this existing Vista, otherwise you will start the installation from the CD-ROM drive, the drive letter will still be confused. Because the drive letter in your existing Vista has been adjusted, the installer will refer to the original correct drive letter when doing an upgrade or a new installation under it. However, it is annoying enough. Even if the installation is done twice, the drive letter is correct, but the identification of the partition letter on the installation CD is still a big problem.

For example, if your system is broken, you need to use Vista's installation CD to repair it. Vista installation CD will still be very good at discriminating the drive letter when you perform System Recovery, just start with CD-ROM installation. When the drive letter is confused, it is a truth.

Second, Vista and XP boot prompt menu failure

Because Windows Vista operating system is not mature in some aspects, so many users now use Windows XP and Windows Vista Dual system, but the problem often encountered with dual systems is the startup menu failure. What should I do if I encounter this problem? In fact, it is a good solution. See the method we provide to you below, and it will definitely help you solve this problem.

The solution is as follows:

1. Load the Vista CD image using Daemon Tools.

2. Open “Run” (Start > Run) and enter cmd.

3. Enter X: (X stands for your virtual drive letter).

4, enter cd boot

5, enter bootsect /nt60 SYS (if you want to delete is bootsect /nt52 SYS).

6. After restarting, the Windows Vista boot manager has been restored.

Third, Vista can not eject USB mobile storage device

In fact, whether it is Windows Vista system or other windows system, there will be a situation where USB mobile storage settings cannot be ejected. The reason for this failure is mainly due to the fact that the USB removable storage device has files being accessed by other programs. Some applications will still exist in the system process after being shut down. It may still be impossible to safely delete the hardware. In this case, you need to re-logout the system and then click to safely delete the hardware.

Fourth, Vista motherboard driver lost fault

The solution to this fault is also very simple, the specific steps are as follows:

(1) restart computer.

(2) When the manufacturer BIOS appears, press F8. Remember to take the time! Or you have to restart again.

(3) Enter the "safe mode" what you can do.

V. XXX.dll error when running games in Vista

Is the Vista system really incompatible with the game? Actually it is not. The main reason for this problem is the error when the game runs the dynamic link library. The solution is also very simple: mainly copy the missing XXX.dll file to the directory where the system partition is located, for example: "X:\\Windows\\System32\\" If you can't find this file, you can also copy the corresponding dynamic link library file to the "X:\\Windows\\System32\\" directory on the installation CD/file.

Six, the desktop icon disappears

The solution is as follows:

I believe that people who don't know how to solve it are not sure how to set it up, but when they are not familiar with vista, Know where to set it up. The following describes the steps 1. Right click on the desktop "Personalization" → click "Change desktop icon"

2, in the desktop icon settings dialog box, select the icon to be placed on the desktop, you can also modify your own Personality icon ^_^

Sixth, Windows Vista does not recognize new hardware how to do?

Vista does not recognize new hardware, a big possibility is the driver saved in your Windows system , was deleted by you.

You may have seen some Vista slimming tutorials at the Vista home, or using the slimming master of the Vista home, the warning inside, you ignored, and deleted the driver backup.

Driver backup is generally stored in: C:\\Windows\\System32\\DriverStore This folder generally takes up 0.5 - 2GB of space.

The solution is to insert your Windows Vista DVD when inserting new hardware.

Seven, Windows Vista can not boot

In the previous we talked about the Windows XP and Vista dual system boot menu, now we talk about Windows Vista alone.

Unable to boot is a more common and serious fault. Previously under XP, this kind of fault requires manual repair by the user. Under Vista, you only need to boot the machine through the CD to enter the Recovery Console, and then enter the fixboot command, Vista will automatically detect the startup failure, and automatically use the BCDMD command to repair.

Eight, Vista taskbar quick start icon lost how to get back?

Under Windows Vista, the quick start project is saved in C:\\user\\username\\AppData\\Roaming\\Microsoft \\Internet Explorer\\Quick Launch Below this folder. If you accidentally delete the icons of several shortcuts that come with Vista, you can do this by creating a new user and copying the files such as Window Switcher and Shows Desktop from the directory of the new user to your original user directory. Under the administrator account, you can delete the newly created user account.