Xp is a fairly stable system, except for the slow speed of the switch, there are very few switch failures. Therefore, users are pursuing two major operations: boot acceleration and shutdown acceleration. In order to meet the needs of users, here we introduce another shutdown shortcut & mdash; standby and hibernation operations.
First, the shutdown acceleration one-click standby
Open “ control panel & rdquo; & rarquo; & ldquo; & ldquo; power options & rdquo;, select “ advanced & rdquo; tab, set here “ when the computer power button is pressed & rdquo; drop down menu, where it is checked “hibernate> or “standby”. Once the settings are applied, you can use one-click standby. For example, before work, there is a work to be continued tomorrow. Just press the power button on the chassis and you can leave work. The next day, press the power button to quickly enter the system and continue the work that was not completed yesterday.
When you resume from standby, you may be sneaked into the data on your computer. In this regard, in the "Advanced" tab, check "When the computer resumes from standby, ask for the password" item, add a security protection for standby.
Second, create “Sleep” sleep button
First in the "Power Options" dialog box, "Hibernate" tab, check the "Enable Hibernate" function. Then right click on the desktop, select “New”→“Shortcut" in the pop-up menu, and enter the “rundll32.exepowrprof.dll, SetSuspendState” command in the "Create Shortcut" dialog box. Click “Next” in the “Select Program Title” dialog box to enter “Hibernate”. “ After completing ”, right click on the “Hibernate” shortcut on the desktop, open the dialog box and select the “Shortcuts” tab, and press the shortcut key you like in the “Shortcuts” button. “F8”. Once set, simply press the “F8” key to achieve one-click sleep.
Three, reasonable setting of standby power
Many times, just leave the computer temporarily, then you do not need to turn off the power of most hardware devices, such as USB interface, network card, mouse and other equipment, so that the recovery speed can be obtained Upgrade.
In the case of a network card, open “Device Manager", right click on the NIC project, and select the "Properties" command in the pop-up menu to open the property settings dialog. Select the “Power Management” tab and uncheck the “Allow the computer to turn off this device to save power” option by clicking Apply. Use the same method to disable the power off function of devices such as USB and mouse.
Fourth, the standby state can also turn off the power
ordinary standby method is not able to turn off the power, because the data is stored in the memory, once shut down, it will cause data loss. To shut down, only sleep is used, but sleep starts longer. If you use the STR technology of the motherboard power supply, you can turn off the power while in standby, and it takes only a few seconds to restore the computer to work.
Most motherboards support STR technology. Take the Soyuz SY-I5PRLE motherboard as an example. After booting, go to the CMOS settings page and select “PowerManagementSetup” to set the power management settings. After entering, find the "ACPISuspendType” item, set it to “S3(STR)” mode, save the CMOS settings. When the standby is used in the future, the power of the chassis will be automatically turned off. When the power button of the chassis is pressed, the system can be restored to the saved state during standby at high speed.
When using STR technology for standby, you cannot cut off the power supply of the motherboard, otherwise the saved data will be lost. In addition, to wake up the system through the mouse and keyboard in the standby state, you can set it in CMOS, and set "PS/SKB/MSWakeupFromS3-S5" to "Allow".
5. Resolve standby automatic recovery problem
Some systems will automatically resume from standby state when they are in standby, and automatically enter standby mode. Most of this problem is caused by improper power settings of the network card. To do this, expand the “Network Adapter” in the “Device Manager”, double-click the NIC item to open the Properties window, in the “Power Management” tab, cancel “Allow this device to take the computer out of standby. Check the status & rdquo;
6. Speed up for sleep standby
When using hibernation and standby, pay attention to some matters. For example, if the system uses hibernation for a long time, the data in the memory will not be cleared, which will make Windows XP run slower. At this time, you can use the memory tools such as “Freemem” to sort out.
If you save a working file before hibernation, temporary files and data will be released, which greatly increases the speed of hibernation and recovery, and enhances data security during recovery. In addition, appropriately increase the system disk space capacity, open the DMA channel of the disk, and dial external devices such as USB before hibernation and standby, which can effectively improve the speed and stability of sleep and standby.
xp is not a perfect system, because its boot speed is not perfect, because its shutdown speed is not perfect, in order to strive for a perfect system, users can perform related optimization operations, I hope the above introduction can Bring some help to the user.