A:GHOSTERR.TXT error occurred during GHOST operation?

This is the Ghost software to copy and write data in the process of reading and writing errors, a dialog box pops up, the purpose is to save the error message to the A disk. Since it is a read and write error, there are generally several cases of A: \\ GHOSTERR.TXT error :
1.ISO file is correct or ISO download is incomplete, no matter what way to download it must verify MD5 code
2. Disc quality: recovery failure due to quality of the purchased disc or disc quality
3 Optical drive quality: recovery failure due to the deterioration of the laser head aging reading capacity in the optical zone
4. Recorder: Recovery failure due to poor quality of the recording quality of the recorder or aging, resulting in recovery failure
5. Recording method: Because the burning speed is too fast, the CD is not easy to read. It is recommended to select 16X/24X speed for burning once.
6. Over-engraving: Recovery failure caused by partial data incompletely due to exceeding the capacity of the disc. Generally suitable for 680M
7. Hard disk has bad sectors: GHOST can not be written because of bad sectors
8. Hard disk problem: Completely format C drive once, do not add Q (example: format c:)< Br>9. Hard disk does not have a drive letter: partition caused by virus or other Recovery failure due to loss
10. Overclocking: Recovery failure due to overclocking instability
If you eliminate the above problem and still read the disk error, it may be other hardware problems. A complete hardware system consists of many components. They are an organic whole. If the quality of a key component is unstable, the whole machine will run unstable. Running Ghost in such a system will naturally lead to errors. According to experience, you should first suspect memory and try to replace the memory. Double memory compatibility. Secondly, check the motherboard, hard disk (and its data cable), and then pay attention to whether the CPU's heat is normal. Since everyone has their own experience and methods, here only point to the point.
This problem exists on many brands, hiding a manufacturer-installed partition before the main partition for the whole system detection, so you should pay attention to this problem when performing GHOST on the brand machine.