Method for accessibility of hosts in the LAN (2)

Question 3: How to handle error handling

Make sure that all computers have the same network segment and that all computers are in the same working group ( Or domain), before changing the workgroup, if your computer is already a member of the domain, you should ask the administrator to detach you from the domain and deactivate your computer's account. To modify a workgroup you must be logged in as an administrator.

In addition, make sure that the firewall is not set to a high level, otherwise it may turn off the necessary communication port, it is recommended to turn it off and try again.
Webpage teaching friendly tips: The topic of non-interviewing in the LAN has always been very concerned about the network management. Recently, netizens have raised similar problems, mainly because Windows 98 cannot access Windows XP, or Windows 2000 or Windows XP cannot. To access Windows XP, let's take a look at the solution to these mutual access failures.

Question 4: Install the service?

To achieve the purpose of sharing, it is essential to install "Microsoft Network File and Print Service". The steps are as follows: Go to Control Panel→Local Area Connection→Properties→Installation. In the Select Network Component Type dialog box, click Service→Add. In the Select Network Service dialog box, click the one you want to install. Service can be.

Question 5: Do you want to distinguish the domain network?

The LAN includes both domain and domain. For the domain network, you should also use the "Network" attribute in the "Main Network Login". Check "Microsoft Network User" to ensure that the domain name is filled in correctly.

Question 6: What if the account is not right?

If you are connected to the external network, it is recommended not to enable the Guest account. If it is only used in the LAN, it can be directly enabled, so it is convenient to access, but there are also A lot of considerations.

1. Open the Guest user

The password can be set, so you can log in (mutual access) by entering only the account Guest. But you need to ensure that the following strategies are turned on.

Click "Start → Run" and type "gpedit.msc" to open Group Policy. Click "Computer Configuration → Windows Settings → Security Settings → Local Policies → Security Options" and find "Account: Local users with blank passwords are only allowed to log in to the console". When enabled, you can't access it with a blank password on the remote, just disable it.

2. Unblock Guest

(1) Open Group Policy, click "Computer Configuration → Windows Settings → Security Settings → Local Policies → User Rights Assignment", in "Deny access from the network" Double click on the "Computer" item to see if there is a Guest. If so, please delete it.

(2) Still in the above group policy, double-click on the "Access this computer from the network" item to see if there is a Guest, if not, please add.

(3) Still in Group Policy, click "Computer Configuration → Windows Settings → Security Settings → Security Options", double-click "Network Access: Local Account Sharing and Security Mode", the default setting is "Only" Guest → Local User Guest Authentication", changed to "Classic → Local User authenticated by himself".

In addition, if you only see the file directory of the Windows XP computer, you cannot enter the folder. This is because Windows XP defaults to a simple way to share files, which can be modified: In the Explorer, click Tools → Folder Options, in the View tab, in the Advanced Settings Remove the hook in front of "Use simple file sharing (recommended)".