Let XP system speedy, just shield five network functions

Finding ways to get Windows XP system to start at a very fast speed has always been the unremitting pursuit of computer enthusiasts. However, when we exhausted the tricks of various optimization systems, the progress bar in the system startup screen still needs to be rotated over a dozen times to start the system successfully. What is going on? Is it the various kinds summarized in the media? System optimization tricks are used to "fudge" people? In fact, many of the network setup functions hidden in the dark of the system are inaccessible to many system optimization tricks. In many cases, these improperly configured network functions slow down the system startup speed; for this reason, we only need to improperly If the network function is blocked, you will be able to speed up the system and add a whip!

1. Shielding network sharing function

If our computer is not in the unit LAN network, then the network sharing function that has been enabled is actually useless, and its existence will be dragged down. The startup speed of the system; in order to increase the system startup speed as much as possible, we can completely shield the network sharing function that has been enabled in the local system. The following is the specific shielding operation steps:

First in the Windows system From the Start menu, go to the Settings /Control Panel /Network Connections command, open the Network Connections list window for your local computer, find the Local Area Connection icon, and right-click the icon from the Start menu. In the shortcut menu that appears, execute the "Properties" command to open the Local Area Connection Properties Settings window;

Next, in the "General" tab of the window, find "This connection uses the following items" in the list box. "File and printer sharing for Microsoft network" option and remove the check mark from the box in front of the option Finally click "OK" button to close the property window, so next time you start down the system when it will not take the time to check the contents of the network sharing.

2, shield full control function

Each time the computer system starts, it will automatically search and scan the relevant shared folder in the local hard disk, and the access folder setting of the shared folder is different. , the time for the system to scan the target shared folder will be different; for example, if a shared folder is set to "read-only" permission, the system may only need 1 millisecond to scan the shared folder. When the access permission of the shared folder is set to "Full Control", the system may need to scan the shared folder for 1.5 milliseconds. It can be seen that when the "Full Control" function of the shared folder is activated, the system is started. Speed ​​will also be affected to some extent. For this reason, when we don't want our shared resources to let others edit and modify, just simply set the properties of the shared folder to "read-only", instead of setting it to "full sharing". After all, under this access property, the security of the shared folder is not guaranteed, but it also affects the startup speed of the system. To mask the "Full Control" feature of the target shared folder, you can do the following:

First open the system's Explorer window, find the target shared folder in the window, and then Right-click the corresponding folder icon and select the "Share and Security" command option from the shortcut menu that appears, and open the property settings window to the target shared folder.

Secondly click the "Security" tab in the property settings window to open the tab settings page. In the "Group or User Name" list box on the page, select the specific user account that you frequently log in to the system. For example, here I chose the "ower" account.

Next, in the corresponding "ower permissions" list box, select the "Full Control" item, and uncheck the status in the "Allow" box corresponding to the option, so that we can share the target file The "Full Control" function of the folder is blocked, and then according to the actual access needs, open the "Read" permission or "Write" permission of the target shared folder, and finally click the "OK" button, I believe that the system The startup speed can go even further.

3, shield automatic search function

When starting a computer with Windows XP system, the computer will generally search for all shared resources in the LAN environment, obviously this Self-assertion of "behavior" can also affect the rapid start-up of a computer system. In order to improve the system startup speed, we can mask the function of the local system to automatically search for shared resources as follows:

First open the Explorer window of the local system, click "Tools" in the menu bar of the window. Option, click "Folder Options" from the drop-down list that appears, go to the folder option setting interface of the system, click the "View" tab, open the option setting window;

Find this In the window, the "Automatically search for network folders and printers" option, and the check mark in the box in front of the option is canceled, and then click the "OK" button, so that the computer system will not take time to start next time. To automatically search for other shared resources in the LAN environment, the system startup speed should be significantly improved.

4, shield automatic allocation function

The "automatic allocation function" mentioned here refers to the function of automatically assigning an IP address to the local network card device by default in the Windows system; Once the IP address of the local network card is set to be automatically acquired, each time the computer system starts up, it will take a certain time to apply for a dynamic IP address that can be used to the DHCP server in the LAN network. If the DHCP server is not accessible, the computer The system will also try to connect repeatedly and access the DHCP server until the access timeout, so the system startup speed will be very seriously affected, and even the system suspended animation. In order to avoid the system taking time to connect and access the DHCP server during the startup process, we only need to set a static IP address that can be used for the NIC device. To assign a static IP address to the NIC device, follow the steps below: Br>

First click the "Start" /"Settings" /"Network Connections" /"Local Area Connection" command, go directly to the "Local Area Connection" property setting interface of the local system, in the "General" of the setting interface In the tab page, select the "Internet Protocol (TCP/IP)" option, and click the "Properties" button in the corresponding page to open the property setting interface, select the "Use the following IP address" option in the settings interface, and at the same time Specify an IP address for the NIC device that is in the same subnet as the ADSL device address. For example, the IP address of the ADSL device is generally 192.168.1.1, then we can set the NIC IP address to "192.168.1.11". At the same time, set the subnet mask address to "255.255.255.0" and the gateway address to "192.168.1.1".

Next, select "Use the following DNS server address", and then fill in the real DNS server IP address of the local ISP. For example, if the real DNS address of the ISP is "61.172.7.1" Then, we can fill in the address here, and click "OK" to save the above IP address parameters. I believe that the computer system will not need to spend time accessing the DHCP server at startup. , then the system startup speed will definitely take it to the next level.

5, shield network mapping function

In order to facilitate quick access to the shared folder in the other computer after each boot, many people will often share the file with each other through the network mapping function The folder maps a disk partition in the local computer. Although this method brings great convenience to shared access, it brings a lot of influence to the startup of the system. After all, the system takes time to search, scan, and connect to the shared folder of each other every time it starts. In fact, we don't need to access the shared folder every time we turn on the phone. Obviously, the network mapping function of the shared folder can be opened at will, which will seriously slow down the startup speed of the computer system.

In order to make the system startup speed unaffected, we can disconnect the network mapping that is temporarily unused in the local computer according to the following steps:

First, double-click "I" in the system desktop with the mouse. "Computer" icon, click the "Tools" item in the menu bar in the pop-up window, execute the "Disconnect Network Drive" command from the drop-down menu that appears, and then select one of the temporarily unused network drive partition disks. Then, click the "OK" button.

Of course, we can also use the "net use" command to achieve the purpose of disconnecting the network mapping connection. When using this method to shield the network mapping function, you only need to open the system running dialog box first, and Execute the "cmd" string command to switch the system interface to the MS-DOS command line state; then execute the "net use x: /del" string command at the DOS prompt to partition the network disk into "X" The network map connection is broken. To quickly disconnect all network map connections on the local computer, just execute the "net use * /del" string command.