Chinese translation of BIOS boot self test

There will be various English short sentences after the problem occurs during the power-on self-test. The short sentences contain very important information. Reading these information can solve some small problems by themselves, but these English are stumping some friends. Here are some explanations of some common BIOS phrases. You can refer to them.

1.CMOS battery failed

English: CMOS battery failure.

Explanation: This means that the CMOS battery is almost out of power, just replace it with a new one.

2.CMOS check sum error-Defaults loaded

English: CMOS found an error when performing all checks, to load the system defaults.

Explanation: Generally speaking, this sentence says that the battery is running out of power. You can try another battery first. If the problem is still not solved, then the CMOS RAM may have a problem. If it is not a year. Go to the dealer to change a motherboard, let the dealer return to the manufacturer to fix it after one year!

3.Press ESC to skip memory test

Chinese: Memory is in progress Check, you can skip by pressing the ESC key.

Explanation: This is because the second, third and fourth tests of skipping the memory are not set in CMOS, and the memory test will be executed four times after the boot. Of course, you can also press the ESC key to end the memory check. But this is too much trouble every time, you can enter the COMS settings and select BIOS FEATURS SETUP, set the Quick Power On Self Test to Enabled, and then restart after saving.

4.Keyboard error or no keyboard present

English: Keyboard error or keyboard not connected.

Explanation: Check if the keyboard connection is loose or damaged.

5.Hard disk install failure

English: Hard disk installation failed.

Explanation: This is because the power cable or data cable of the hard disk may not be connected or the hard disk jumper is not properly set. You can check if the connections of the hard disk are plugged in, and see if the jumper settings of the two hard disks on the same data line are the same. If they are the same, just set the jumpers of the two hard disks differently. (One is set to Master and the other is set to Slave).

6.Secondary slave hard fail

English: Failed to detect slave disk

Explanation: It may be improper CMOS settings, for example, there is no slave but set in CMOS From the disk, then there will be an error, then you can enter the COMS settings to select IDE HDD AUTO DETECTION for automatic disk detection. It may also be that the power cable and data cable of the hard disk may not be connected or the jumper of the hard disk is improperly set. For the solution, refer to Article 5.

7.Floppy Disk(s) fail or Floppy Disk(s) fail(80) or Floppy Disk(s) fail(40)

English: The floppy disk drive cannot be driven.

Explanation: The system prompts that the floppy drive cannot be found. See if the floppy drive's power and data cables are loose or wrong, or put the floppy drive on another machine. If these are all No, then I have to buy one more, but the floppy drive is not expensive.

8.Hard disk(s) diagnosis fail

English: An error occurred while performing hard disk diagnostics.

Explanation: This problem generally means that the hard disk itself has failed. You can put the hard disk on another machine and try it. If the problem is still not solved, you can only fix it.

9.Memory test fail

English: Memory test failed.

Explanation: Re-plug the memory module to see if it can be solved. This problem is generally caused by the memory modules being incompatible with each other. Let's change one!

10.Override enable- Defaults loaded

English: The current CMOS settings cannot start the system and load the default values ​​in the BIOS to start the system.

Explanation: Generally, there is an error in the setting in COMS. Just enter the COMS setting and select LOAD SETUP DEFAULTS to load the original setting value of the system and restart it.

11.Press TAB to show POST screen

English: Press the TAB key to switch the screen display.

Explanation: Some OEMs will replace the BIOS default boot screen with their own display screen. We can press TAB to enter between the BIOS default boot screen and the manufacturer's custom screen. Switch.

12.Resuming from disk, Press TAB to show POST screen

English: Restore boot from the hard disk, press TAB to display the power-on self-test screen).

Explanation: This is because some motherboard BIOS provides Suspend to disk function. If we use Suspend to disk to shut down, then we will display this on the next boot. Prompt message.

13.Hareware Monitor found an error, enter POWER MANAGEMENT SETUP for details, Press F1 to continue, DEL to enter SETUP

English: Monitoring function found error, enter POWER MANAGEMENT SETUP to view details Press the F1 key to continue the boot process and press the DEL key to enter the COMS settings.

Explanation: Some motherboards have hardware monitoring functions, which can set the temperature monitoring of the motherboard and CPU, the voltage output level monitoring of the voltage regulator, and the monitoring of each fan speed. When the above monitoring function is turned on When you find an abnormal situation, then the above paragraph will appear. At this time, you can enter the COMS setting and select POWER MANAGEMENT SETUP. On the right, **Fan Monitor**, **Thermal Monitor** and **Voltage Monitor** Which part of the exception was issued and then resolved.