Create a WinXP system universal clone Ghost Raiders

It’s always a thankless task to install the operating system and application software. Although the computer speed is getting faster and faster, and the operating system installation steps are very simple, each time it can only wait for the system to be slow. Slowly and step by step, after the system is installed, then install the application software, and also set the network usage rights, etc., there is a complete system of fashion almost one day, occasionally it does not matter if it is installed, if it is a lot of computers, or help When someone else installs a computer, it certainly won't work. Sometimes it's a long time to stay with others for a whole day, just to install a system, time is wasted, often hard to please!!

Although, Windows The system has an unattended installation program, but it does not save much time. After the system is installed, it is necessary to install the application and set the network permissions. It still takes a lot of time! And most of the people in the installation process are sitting there stupid!

Everyone knows that in order to save the machine and save time, most people will use GHOST (clone) software in this machine. Backup your own operating system once, (although the backup file takes up space, but for the current large-capacity hard disk, 1-2G space is not a problem!) When the system crashes or other problems cannot be started, just use GHOST, 5 minutes. You can restore your own operating system and applications, etc., enough to save yourself a whole day! But that's all local backup, so everyone is thinking, can you do a universal clone (universal GHOST), you can also quickly restore on other people's computers, which not only saves time, but also can complete some previously impossible to complete jobs. In fact, we only need to solve the hardware driver, and XP system activation problem!

Gossip less, we start to solve the problem, 2000 system does not need to activate, and XP and 2003 need to activate ( Friends who use non-VOK version should not watch it. It is only suitable for friends who use VOL version XP/2003 to continue watching it!!!

First, XP system installation optimization

Install the XP system in the C drive and install the common software to the system disk (c: program file directory, such as OFFICE2003, media player, compression software, etc.), (must install the XP disk with C disk, can not be installed to other partitions, Unless you are the entire hard drive GHOST) At this point we will find that the installed system disk has almost 1.5G space even if it does not install any application, even if GHOST maximum clone compression, an XP system has 755M size A CD can't be engraved, so it's not practical! Because there are many things in the system that we can't use after the XP system is installed, in order to save space and burn, we have to optimize, (of course, If you every time To install the system for others is to bring the hard drive, then there is no need to optimize the file to save space - recommend everyone to use the hard drive to sing). When optimizing, we mainly delete some backup files and description files.

·Build WinXP system universal clone Ghost Raiders

We first turn off the power management sleep function! Click the desktop right--attribute--screen saver--power--advanced. At this time, the page file hiberfil.sys in the root directory of the C drive will be automatically deleted, the size is your memory capacity, if you are 1G memory, then the file size is 1G!

Then turn off System Restore and Automatic online update function, click My Computer - Properties - System Restore and Automatic Update.

Then delete the alternate dynamic link library (dll file) with the SFC command to delete the files in the
c:windowssystemdellcache directory to free up space. The command to delete all files is sfc.exe/purgecache (sfc.exe/? to see the meaning of the command parameters), or you can delete it manually! About 300MB.

At this point, XP loses weight to completion.

(Hint, weight loss is only for the convenience of GHSOT CD burning, generally if you use the hard disk clone users do not need to lose weight, and pay special attention to, after the application is installed, then lose weight,)

Second, delete the original driver of XP system, you can clone!

There are two methods for universal clone, one is to delete the direct clone, the other is completely repackage!

Several versions of XP Universal clones that have been circulated on the Internet have been deleted for direct cloning! The complete re-encapsulation is to re-encapsulate after removing the driver! (Microsoft officially uses the full re-encapsulation method)

Start the operation step by step!

1. Open the device manager (click My Computer--Properties--Hardware--Device Manager)

We first uninstall and change the driver inside: Note There is a sequence!! First uninstall the network adapter, and the universal serial bus controller, and the sound, video game controller, monitor, display card, right click when uninstalling, point to uninstall. The system prompts you to restart, press No, do not start!! (Uninstall the graphics card to prevent GHOST from appearing on other machines may appear blue screen phenomenon)

2. Next, click Advanced Configuration Power Interface ( ACPI) Right click, update the driver, pop up the update wizard -----, install from the list or specified location (advanced) ---- point, do not search, I have to choose the program to install and change to Standard PC After the point is confirmed, the computer will also prompt you to restart, press No, do not start! (Hint: Most of the computers are now Advanced Configuration Power Interface (ACPI): (Advanced Power Management), then this step can actually be done!

·Build WinXP system universal clone Ghost Raiders

The reason for the change is: If it is not changed here, if the new machine is not the same type of ACPI, (if the new motherboard is now displayed as acpi uniprocessor pc!) then there is no other problem on your newly cloned machine. Can't realize computer soft shutdown!

So, after GHOST to the new machine, change the Standard PC back to your corresponding power management mode. This is also the current XP Universal GHSOT that will remind you to do it. The description of this step operation..

3. Finally, be sure to change the IDE ATA/ATAPI controller. This step is the main step of the XP system universal GHOST!! This step does not do, then GHOST to other The machine can't be started at all, the computer will restart constantly!! So in order to adapt to different motherboards now (such as Inter motherboard, VIA motherboard, SIS motherboard), you must change your local IDE controller into Quasi-two-channel PCI IDE controller!

Point (this machine is Intel(r)82801AA Bus Master IDE Controller- different motherboards) Right click, update driver, pop-up update wizard----, point Install from the list or specified location (Advanced) ---- Do not search, I have to choose the program to be installed and change it to the standard dual-channel PCI IDE controller. After confirming, the computer will also prompt you to restart. At this time, after the point is determined, shut down directly!!

(Note, at this point, the delete driver has been completed. At this time, if you want to clone it, after the computer is turned off, connect the hard disk to another computer, or this machine. After the computer is booted from the CD, the contents of the C drive can be GHSOT to other partitions!!)

Nowadays, the 2000 and XP universal clones circulating on the Internet generally do this!!

However, everyone can clearly see that although XP supports almost all current hardware! Although the XP system will install the driver on the other machine's hardware after booting on another machine, it feels like this is how it feels. Reluctantly! In the first Some of the drivers left on the mother machine may also be forced to work, so the system is unstable, or the blue screen of death may occur!!

In order to be more stable, let the system install the computer hardware by itself. Drivers! At this point, we thought of the Sysprep.exe-system repackaging tool in the Microsoft Enterprise Deployment Toolkit. We just want the system to reinstall the required driver completely in the newly cloned computer, instead of using the local machine driver. (To put it bluntly, the computer system installation process is to let the computer find and work on the current hardware.) The process of driving)

·Create WinXP system universal clone Ghost Raiders

Third, create an automatic answer file, the system repackage!

System repackaging tool installed in Windows xp The CD is already included! The location is the
(X:SUPPORTTOOLSDEPLOY.CAB) file of the installation CD. Next we start using this tool step by step; we first recommend a folder named Sysprep in the C: root directory and extract the DEPLOY.CAB archive file to Wins to c:sysprep.

In fact, we only use 3 files, but it doesn't matter how many!! Because the files in this directory and in the directory will be deleted automatically after the system is first started, don't worry about us! Br>

1. Create a system auto answer file!

Have played the system unattended friends, I think it is no stranger here!! But the novice may ask "why to create this file!" Whether the computer system is installed in the factory mode or repackaged, the user will be required to input some necessary contents, such as user name, computer name, installation serial number, etc., but there is a serious problem, that is, the GHOST clone in the new machine. During the installation, when we need to input this information, the system has not found the keyboard and mouse driver, the keyboard mouse is suspended, and the system must be automatically answered and installed. Otherwise the installation is definitely not successful!!

Click the C:sysprepsetupmgr.exe file,

Click Next to create a new file!

Click Next: Select Sysprep to install,

Click Next, here according to different system choices, we are XP Professional, choose the second one! (Of course, if you want to do Windows 2003 system, here is based on your system choice)

Click Next, you must choose to install completely automatically, otherwise you will lose yourself!

Click Next, you will come to this installation management interface!! At a glance, you understand that these contents are what we need to install XP. The content of the filled-in, the advantage of automatic installation is that we first input, do not need to input when installing!!

Here, we only need to input the necessary items, all other directly press the next step The product key is of course needed! The computer name is also needed, otherwise the automatically generated name is generally ugly! The administrator password can not be lost, (of course, it is best not to lose, others will change when others need it). Language must choose Simplified Chinese here. Nothing else is required for input or selection. The next step is fine.

Once the point is determined and completed, the answer file for the fully automated installation is successfully created. (And, the file name of this file must be sysprep.inf, the directory must be in the c:sysprep directory)

Special note: c:sysprep Do not put other stuff in this directory, because this file The folder will automatically delete this folder and all the contents of this folder after the system first starts the answer installation.